Search the Community
Showing results for tags 'update'.
Found 8 results
USCutter PSN VinylMaster Update
VinylMaster posted a topic in VinylMaster CUT, LTR, PRO & DSRUSCutter Edition Updates: This webpage has the very latest builds of all USCutter versions: http://fcws1.com/usc1.htm Non-USCutter Edition Updates: This is the updates please go to this webpage: http://iifuture.com/vmfull/getvm.htm
Graphtec FC2200/90 Cutter Firmware-Update
inonyman posted a topic in GraphTec Cutting Plotter Support RequestsDear community, I am the proud owner of a newly purchased used Graphtec FC2200/90 flatbed plotter from about 1989 to 1992. The plotter is in a generally excellent condition and ready to use. Since I have problems using the Plotter with Adobe Illustrator in combination with Cutting Master 4 Plugin, I would like to know, if it is possible to update the plotters firmware to ‘Plotter Firmware v4.50 for Graphtec FC2250’? I am not sure, weather the FC2250 v4.50 Firmware is suitable for my FC2200/90 plotter. I would also install the ‘Windows Driver OPS662 (v3.90)’ on my Windows Laptop and install ‘Cutting Master 3 for Windows Ver.2.2.1252’ instead of the current version. I would be extremely grateful for any help!!!
Coreldraw Graphics Suite 2017 Update 1 - 126.96.36.1999 Released 7/20/2017
PixelPusher posted a topic in Corel DrawCorel has finally officially released Update 1 on 7/20/2017 for Coreldraw Graphics Suite 2017. This is a MUCH needed update and improves stability and operation. Release Notes On What's Fixed: http://www.coreldraw.com/en/pages/patches/cdgs/2017/update1/ Direct Download (76.9 MB): http://www.coreldraw.com/en/pages/patches/cdgs/2017/
Virus in the free update?
Guest posted a topic in VinylMaster CUT, LTR, PRO & DSRHey everyone, has anyone else gotten virus alerts when downloading the latest update for Vinylmaster?
Latest FTDI Drivers For All OS's
PixelPusher posted a topic in Copam Cutting Plotter DiscussionHopefully this becomes a sticky but the latest FTDI (Future Technology Devices International Ltd.) VCP (Virtual COM Port) drivers for both the COPAM and IOLINE line of cutters (it's possible more cutters use the FTDI drivers too and if so, then these will work for those cutters also) available on Windows, Mac and Linux (More operating systems available on their site. All versions including 32-bit and 64-bit) can be downloaded at http://www.ftdichip.com/Drivers/VCP.htm Be sure to look at the far right Comments Section of the table to find the link named "Available as a SETUP EXECUTABLE" to download to have the easiest way to install the drivers. There are installation guides for all OS's too. Note: FTDI VCP drivers work for all Copam and Ioline Smartrac series of cutters. These drivers are constantly updated. Check back occasionally to refresh your drivers.
SignGo Pro (FD) 1.20 has been updated for June 17 2017
PixelPusher posted a topic in Other Software ProgramsA heads up, SignGo 1.20 has been updated finally as of June 17, 2017. The cutter devices list has been updated too. Change Logs Page on Website (Details changes to builds): http://signgo.com/index.php/downloads/4-free-30-day-trial/5-signgo-pro-v1-20-zip/changelogs SignGo Pro 1.20 FD (Flash Drive / Dongle Edition ONLY) Download URL Note: SignGo doesn't publish this URL any longer on their website for some reason, which is extremely frustrating to legitimate dongle owners (like me) so BOOKMARK THIS UPDATE LINK! Otherwise, if you don't have a dongle edition, you can use their latest 30 day trial build to update your existing regular license installation. Version: 1.20 Date: 2017-06-17 Saturday 10:36:00 - Amended Vinyl Express Cutters to include blade offset support - Added Roland GR Series - Tweaked Creation PCUT CS series (added @ to reset string and changed start strings) - Added Vinyl Express R Series II - Added Redsail RS360C/450C/500C - Added GCC Jaguar 5 Series - Added Mutoh ValueCut Series - Added Roland GS Series - Added Calortrans CT60 - Added Goldcut JK Series Upgrade Instructions PDF Look below for a PDF I created that details the download and update procedure complete with screenshots and all relevant information to help you upgrade and get going again. Save this PDF file in your archives as it's super important! In fact, if you have the FD version just copy it over to your Flash Drive itself - it's got 8GB of free space on it after all. SignGo Upgrade and Download Links.pdf
Graphtec FC7000-130 Firmware Update Problems
alexwoj posted a topic in GraphTec Cutting Plotter Support RequestsI hope this finds any helpful member as I am stuck with a brick of a plotter. So, I went to update the firmware for Graphtec FC7000-130 (USB) to v2.10 (from Graphtec website) to get the perf option. Downloaded all the updates on that page (Windows 7, 64 bit) and thought I followed the instructions well, it started loading, but now it gives me 3 different errors: 1. Straight power up - [bOOT START ERROR] or 2. Power Up, holding Left & Right, goes to Update / Yes then shows [CHECK SUM ERROR] or 3. Power Up, holding Left & Right, goes to Update / Yes then shows [PLEASE SEND PRGM] - I hit PRINT from the Data File Output Utility and [Cannot Access Output Destination] Pops up. What Gives? What should I do next? I attached a screen shot of all the relevant info I could fit. Please feel free to contact me by whatever means are most convenient to you. My contact info is below. Thanks for your help! Alex Wojciecowski Socha Visual Inc. firstname.lastname@example.org (415) 508-5927
cutter not cutting to plot line
plugy posted a topic in FlexiI have flexi 8.1 with a liyu cutter and cannon printer. Running windows 7 64bit to get working i am running it in xp compatible mode. I import a bitmap, transparent, then contour cut to select the outline i want. Send to printer it prints with registration marks. It then sends to cutter when i set up the optical eye on the marks it starts to cut. BUT doesn't cut round the image it is like an inch of, how do i get it to cut accurately