Search the Community
Showing results for 'titan signblazer'.
Found 50 results
-
Pulled the trigger today
preachinggear.com replied to SmallSigns's topic in TITAN 2 Series Vinyl Cutter Discussions
Anybody seen these ongoing issues with SBE using the Titan cutter? Hoping for some answers. I got it to work for a few days, but now it keeps putting the Titan as "offline" and when I uninstalled and reinstalled the drivers (which I finally got to work from some help off of another thread here), now it keeps giving me an "Error Printing Signblazer" message every time I try to cut. -
Red & Black -- LPII forms the visual centerpiece of my sign shop
slice&dice replied to slice&dice's topic in LaserPoint Cutting Plotter Discussion
First impressions of LPII --- Substantially quieter than both the SC and MH units I've had. The keypad is the same basically as the SC, and there's the same awkward key combination in order to set the origin. It's running fine with RedSail driver. I very much want to migrate into VinylMaster, but I'm still knocking around with SignBlazer, it's like an old comfortable shoe. Best feature so far --- the spacious upper tray which holds tools very well. Oh, by the way, I went with the LPII and not the Titan 2 servo, because there's no 34" size Titan 2. If there had been, I would have gotten it. -
Let us know when you get it connected finally --- there are several threads concurrently running with you seeking advice on having SBE and the Titan to get talking to each other. http://forum.uscutter.com/index.php?/topic/50162-does-signblazer-work-with-the-new-titan-3-cutter/?p=405426
-
Laserpoint 2 - Parallel Line Issue
mb20music replied to adventur Studios's topic in LaserPoint Cutting Plotter Discussion
Did you try using different software, such as Signblazer, it is free if you want to download it and try it and that way you can rule out it being a software issue. If it turns out not to be a software issue, it might be time to consider upgrading to a Titan or better yet Graphtec cutter. http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe- 13 replies
-
- laserpoint
- laserpoint ii
-
(and 3 more)
Tagged with:
-
not sure but think people was using the copam cp 2500 with signblazer. signblazer quit develpment about 7 years before the titan was thought of
-
I just got a Titan 2 a few weeks ago and LOVE IT!!! I upgraded from a 6 year old LaserPoint that had the same issues you are talking about. I managed to get it working with SignBlazer (which I love!) I have already made enough to pay for half of the Titan and I only do limited work on the weekends. the time I have saved in weeding has been tremendous and the face that it is a true USB connection is great. I'm running SignBlazer on Windows 8 and do everything from my laptop now - no need for a second computer with a serial connection. I say do it!!!! You will be so happy to have a real cutter.
-
I currently have a MH871 and SignBlazer. I am looking into upgrading to a Titan or a Graphtec. My question is will my SB files transfer to be usable with one of these? Thanks
-
Any help please!
slice&dice replied to blacklabelgraphix's topic in TITAN 2 Series Vinyl Cutter Discussions
VinylMaster Demo allows cutting or saving? I seem to recall the Demo/Trial version had those disabled, but I could be wrong. SignBlazer is an alternative software that'll work. Try using Copam driver for Titan. -
Still loving the Titan 2
slice&dice replied to crome's topic in TITAN 2 Series Vinyl Cutter Discussions
I've already got VM. It's a cool program, but I'm still comfortable in SignBlazer. I'm hoping that SignBlazer runs the Titan 3. -
Right now i run a small sign shop as a side job and i gain more and more business. I started with a cheap cutter and signblazer. I used that for the first 3.5 years and finally decide to upgrade my cutter. I bought the uscutter titan 2 28". About the same time i started thinking about upgrading my software and i ended up buying Vinylmaster Ltr. The problem is i find my self doing more and more jobs that involves tiling. Ltr does not including tiling so i have just duplicated the objects cut them in half and then matched them back up. My question is.......i'v never had the tiling feature so is it worth it or is the way i'm doing it now going to be almost the same? Is upgrading to vinylmaster pro worth the $275? i've tried to look at the differences between the two and nothing really sticks out that i need. But i'm fairly new and self trained thru youtube so there might be a whole lot of new tools that i'm missing out on that could make my life alot easier? Any input on this subject would be appreciated!
-
If you are going to use AI with Signblazer, you will have to save the files back as an older version 8 .eps files, as Signblazer has not been updated for many years, since the owner passed away. There are not that many choices in cutting software...Flexi products, Vinyl Master..Signcut,.are more options.,.but you have to purchase. I see that Dragoncut is for the Titan series, as they are Saga cutters. http://www.ebay.com/itm/DragonCut-Saga-Vinyl-Cutter-Software-/400675225012?pt=LH_DefaultDomain_0&hash=item5d4a1abdb4.
-
I know nothing about the Titan,,,Signblazer has not been updated for several years, but that design could very easily be recreated in Signblazer and cut
-
Still loving the Titan 2
xpaperman replied to crome's topic in TITAN 2 Series Vinyl Cutter Discussions
signblazer runs the Titan 2! -
I have had the LP2 for about 3 years now, I have been frustrated with it for the last 8 months, something is always needed to be fixed. I am looking for advice or any suggestions on switching over?? I want to continue to use SignBlazer, I am reading it is possible, does anyone know if it is hard to change over? US cutter can not say it will work for sure. I really would like something that cuts quieter and not such a pain lol Sorry for the rambling, 3 hours of piddling with the cutter has my head a bit fogged up Thank you for any help.
-
***HELP!*** Titan 2 Cutting Outlined Text Offset!
slice&dice replied to Go Schock Graphics's topic in TITAN 2 Series Vinyl Cutter Discussions
Try another cutting manager program. SignBlazer should handle the job --- don't bother with Illustrator, just go right into SB and retype. It will take you three minutes to reproduce that wording & layout. http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198 (select a Creation PCut CT630 driver, that might work with your Titan) -
There should be no problem whatsoever, even using SignBlazer Elements. http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198 Also, if you want something more robust, try VinylMasterCUT program. $80. (Titan 2 has a special version) http://www.uscutter.com/VinylMaster-Cut-Design-Contour-Cut-ARMS-Software
-
VinylMaster Support Issues (US Cutter Moderators Please Read)
MZ SKEETER replied to storm2313's topic in VinylMaster CUT, LTR, PRO & DSR
they are: Copam 2500 driver. http://forum.uscutter.com/index.php?/topic/50162-does-signblazer-work-with-the-new-titan-3-cutter/?hl=titan3 -
need help connecting please
slice&dice replied to jmeimerstorf@gmail.com's topic in Table TITAN Series Vinyl Cutter Discussions
Congratulations, you've just picked up a very nice unit. I would immediately call USCUTTER support line and mention that you want to have the bundled software conveyed to you --- VinylMaster. As for SignBlazer, there won't be a "TITAN" listed within the cutter choices in Setup, but I'm going out on a limb here and saying a Roland or Copam or even Liyu driver might get it rollin' When you say "help connecting" -- we are hoping you have the wires sorted, OK mate? -
need help connecting please
jmeimerstorf@gmail.com posted a topic in Table TITAN Series Vinyl Cutter Discussions
Just bought the Titan cutter. I am currently using Signblazer. Do these programs work together? How do I connect the 2 together? -
OK, let's review ---- 1. You were sending a job to the cutter. What software are you using? 2. Within WINDOWS hardware Device manager, is the USB root connection showing the device? 3. What PORT is assigned? Here's what I would do --- download and install SignBlazer ELEMENTS. http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198 The Titan 2 will not be listed in the cutter setup, but Copam Cp2500 driver has been successfully used by others.
-
I believe I had a USB port go bad on my laptop last night, and it is the only port my cutter will work off of for what ever reason. Is there a way I can get my cutter to work off a different port? I tried 3 different softwares last night VMP sure cuts a lot and signblazer but every one is tell me it can not communicate with my cutter. I can hit test on the cutter and it will cut the test square. I was hoping there was a way to make my cutter work off a different port and try that. I have a titan 2 cutter.
-
I use copam drivers with my titan 2 to use signblazer.I bet sign lab has the copam drivers
-
Saving my speed and force settings
Dakotagrafx replied to eddieb378's topic in TITAN 2 Series Vinyl Cutter Discussions
not sure on the titan but on the grraphtec I can change the setting on the plotter from within flexisign or graphtecs cutting controller - now it has been a long time since i used signblazer but is there a setting in the cutting part that could be resetting those from there? -
Please share the information -- what driver did you end up using? Jerry Bonham knew his stuff when he programmed SignBlazer with such a wide assortment of cutter drivers, and it doesn't surprise me that the Titan models will work with one of those which are included in SBE !!!
-
I'm about to upgrade to the 28" Titan cutter from my 24" PCut and I'm curious if I can somehow transfer my files I have created in SB to SCALP. 95% of my work is on SB and I would need a way to get them to SCALP. Has anyone done this type of file transfer or file conversion? If so, what did you do to go from SB to SCALP.