Leaderboard

I always overlay. I'm sure there is a valid reason not too in some specific scenario.... but I haven't ran across it yet. My OCD would destroy me if i left any form of a gap from trying to 'punch'.

They're actually listing the Sublimation Ink for sale on Cobra Ink now - http://cobraink.com/ink/4-6_color_Sublimation.htm

several of us from time to time need someone to do vectoring of a graphic. I am going to pin this a s a place to put ones that you have used that you have had a good experience with. if someone post that they do work and you have had good success with them like thier post to show your approval of them I have used http://www.excaliburcreations.com/ several times with great success another one I loved I am not so sure is still around so if Joe shows up I will give him a plug too I have heard skarekrow and Mrk-S does great work but lets here from some users on these!

A job i did over the weekend! I did it only 3 times .. all 3 times he changed his mind on the front 3 windows! <3 getting paid cause they change there minds.. But i'm Glad its over now! I did the top lighted up sign and the door minus the Address Numbers the Building said i couldn't change the size of them and the door and hours and also did his cars! The window's where 41x46.. I cut all the windows out on my 48 inch roll of vinyl one big sticker.. <3'ed it hehe

Just got me a new heat press so this is going to be a new experience trial and error...my question is do I need to purchase something to apply between the decal and heat press?? I am using the Siser EZWeed

Hello Everyone! My name is Marie, and I am located in South Carolina. I just got my Silhouette Cameo a big brother (a Roland GX-24). I have not been doing anything professional before this, but I am thinking of giving it a go. I had planned to focus on Wall Art, but things might be leading me in a different direction. I have a family friend that is looking for some signs for an event, so we will see how that goes. I look forward to being involved in the discussions here. From what I have read so far, I can tell there are alot of experienced and talented people here! Marie

I know one of the bosses is totally stretched to the breaking point trying to keep people trained. doesn't help it is a revolving door. you have to retain people to make that better and not just lean on a few to carry the load

dakotagrafx you are 100 % right. The kid that answered the phone today needs more training. Today i did not know what I wanted but needed. It was his job to be a tour guide to sales. Maybe his boss will read and coach D

Good luck with your new equipment. You can do ANYTHING YOU WANT!! Go for it!

Either way, SeeJay says he didn't do the address numbers on the doors.

we had one in Michigan a couple years ago that got busted for doing sports teams logos. was a huge operation. too bad I retired from the prison I could have asked them about it.

I agree I started with the SC Now I have a unit with a servo and for the life of me can't figure out why I didn't make the jump sooner. It's a HUGE difference.

<blockquote class='ipsBlockquote'data-author="FrznFire07" data-cid="362421" data-time="1403649635"><p> not trying to be a downer here, but in the first picture 3529 looks crooked. Is it just the angle?</p></blockquote> Looks like the picture angle to me

Never done that but I have done it with 3G and no parchment or colormask. Things got ugly fast so I see your point besides my teflon is attached to the press with magnets so I can't forget anymore.

peace of mind Jay - peace of mind - just one time putting a transfer on upside down when tired etc will make it a cheap insurance

We all started somewhere. I wouldn't want the sales job any more than they'd want my headache of a job.

cutters like the titan2, roland gx-24 and graphtecs use servo motors instead of stepper motors - much more precise movements

Nice Work!

Different font, perceptively larger Still not that crazy about it... I'll let you all take it from here. StrongWheeled_04c.svgStrongWheeled_05b.svg StrongWheeled_04c.epsStrongWheeled_05b.eps

What's your address? I'll be there to catch it! I have a Graphtec at work with Graphtec Studio. I'll try to post the settings tomorrow. Have you checked that Tangential Mode (a.k.a. overcut) is off?

mr300s is right...I used to get the same thing until I set my offset to zero. It will probably make for a slower cutting process, but you can always increase the actual speed. If you're using Cutting Master 3, you'll find it under the cut window, tool setting, offset angle.

Common sense is apparently not a requirement for a police officer in that town

Every state is different. Down here I don't have to tax signs that are agricultural in nature. Had a lady at the tax dept. tell me I was wrong until I sent her a link to the exemption. No more calls from her lol.

Thisis the link for the above mentioned "Draksis" his name is William and he does FANTASTIC work with quick turn around and GREAT rates http://www.excaliburcreations.com/ I had him do a graphic for me too, it came out great and got it back in less the 12 hours in about 5 different formats including a pdf. reasonable too.

I take on vector projects as well... pm me for more info. http://www.malcoHm.com