mb20music

http://www.dafont.com/search.php?q=krinkes+decor&text=French+Quarter

Goudy Old Style or another variant of Goudy

No, it is not metallic, if you want metallic gold you would need to purchase Oracal 751, which you can purchase by the foot if you don't want to purchase an entire roll. http://www.uscutter.com/ORACAL-751-Conformable-Vinyl-24-By-The-Foot-Continuous

Care to elaborate? LOL

He probably googled up a better image like this one...

Or you can do something like this, this would be great as a "fridge magnet" as well... mpt_bone.EPS

Well if you were just going to give them out, I would just do them in a single color, much, much easier to make of course...

Well, I get Stanford Script LHF (StanfordScriptLHF *Oblique) in Find My Font. Here is how you can do it in FMF... http://screencast.com/t/tGdKps7snsp

FrizQuaReg (Regular) or Septimus (Regular)

Looks to me like you may have too much blade sticking out of your blade holder and possibly too much speed and force / pressure.

Guess he just likes doing things the hard way. LOL

Not really

If all you need is the letter "B" here it is, not perfect but it might be good enough... letter_b.EPS

Not sure why you posted this in the "mature audience only" section LOL

Probably best printed rather than cut...

Signblazer trial software will never expire, no registration code is required.

pheasant.EPS

Jenna Sue http://www.dafont.com/search.php?q=jenna+sue

Something like this?? hpr_symbol.EPS

This might work for you... http://www.uscutter.com/GreenStar-GS-UCB7000-Ultra-Cut-II-General-Purpose-Stencil-Adhesive-Reusable-Material-Assorted-Sizes

Well, actually the font name is "Luna Bar" not Lunar Bar LOL

Well, from what I have heard, if you are unable to get your machine going again after doing the "factory reset" it most likely means you need to replace the main board. But, you could try downloading and reinstalling the firmware... http://www.graphtecamerica.com/graphtec-america-support-downloads-cutting-plotters-discontinued-legacy-cutting-plotters-ce5000-60-120

You said you are connected via Parallel port ??

Did you try to do a factory reset? Turn machine power off Hold UP button while turning power back on