Search the Community

Hi folks, I decided to purchase a 2nd hand GCC Puma III. Unfortunately, the cutter did not come with a CD. Does anyone know where I can download driver for this machine? Thank you Josh

i bought GCC i-craft this month of june 2017 but the problem is when i click the cut button found on the sure cuts a lot 4 it sends the image to the GCC Machine, it only display the word "Cutting" but no response from the machine. I've waited too long but it does not start on cutting. When i cancel the job , it only display "please wait JOB CANCELLING" i also waited for too long but no response from the machine. I already consulted the admin of sure cuts a lot, they help me with my problem, i sent them the svg file i used , they tried it to other machine, and its ok, svg file is working fine. I dont know if the problem is on the machine or the connection between my Windows 10 OS i have on my laptop or on the GCC i-craft. I badly need your help. My GCC-i craft was stock at home, it so useless if i cant cut anything i've downloaded from the internet even tracing doesn't work also. It only cuts the basic shape found on the library of sure cuts a lot 4. I already contact technical support on gccworld, but no response from them. I hope someone on this forum will help me with regards on my cutter issue.Thanks in advance

hello, i have just go a panther (or jaguar II-61) from vinyl express (used) from ebay but i have tried everything to get it to work using windows and usb, but i cant when i try to install the drivers, it ask me to change the usb mode to common usb (from gcc usb) but this model doesn't have under misc the option to change it (as on the jaguar 2 manual) anyone can help me? does any one knows how to change the usb mode on this cutter? maybe it need a firmware upgrade, 1.2 actual, or can anyone help me? thanks alot

Hi All, Hope someone may be able to advise. I'm looking for a vinyl cutter that will also cut CARD, ideally 350gsm weight and above. Looked everywhere but cannot get clarification on this. Have seen YouTube video showing GCC Expert or Puma cutting card, but no info as to what weight the card was. I understand that a carrier sheet will be required and the pinch roller pressure good to keep traction of the material. Has anyone ever cut card on their cutter..? Any suggestion/advice welcomed. Thanks, Matt.

I bought a gcc jaguar IV froma company that used it as their floor model. It was supposed to come with greatcuts etc. I understand that greatcuts is not mac compatible BUT that disk also has the directcut program on it. Is there anyway to get the DIrectCut program by itself (free or not)? I have Signcutpro (another topic) seems to really have some issues with contour cutting. any help would be appreciated. Mike