Coaster36 327 Posted September 29, 2014 Go-C I think you have the best design so far. That being said I will now copy your design. Where about would you find those pipe hangers? The ones holding the Pvc... If you found them at home Depot or Lowes, what section of the store are they? Share this post Link to post Share on other sites
101LEDs 100 Posted September 29, 2014 They are in the plumbing section. They work good for hanging extension cords too http://www.homedepot.com/p/Sioux-Chief-3-in-PVC-DWV-J-Hook-Pipe-Hanger-HD553-8W/202274026?N=5yc1vZbqjc http://www.homedepot.com/p/Sioux-Chief-1-1-2-in-PVC-DWV-J-Hook-Pipe-Hanger-HD553-6W/202274024?N=5yc1vZbqjc Share this post Link to post Share on other sites
Go-C Graphics 856 Posted September 29, 2014 Go-C I think you have the best design so far. That being said I will now copy your design. Where about would you find those pipe hangers? The ones holding the Pvc... If you found them at home Depot or Lowes, what section of the store are they? I will let you copy my design on 1 condition. You have to post pictures of it when you're done. Share this post Link to post Share on other sites
jonvince 3 Posted September 29, 2014 She's not pretty, but she's functional. After some help finding some core plugs, I built this using some scraps I had lying around. 2 Share this post Link to post Share on other sites
pshawny 410 Posted September 29, 2014 Looks good! Those power cords might cause some wrinkles though Share this post Link to post Share on other sites
express2100 154 Posted September 29, 2014 -jonvince, if I remember correctly it's better to have the tape closer to the table. Nice functional design but you might want to drop it about three inches. Share this post Link to post Share on other sites
jaybyrd 3,770 Posted September 29, 2014 Higher like that gives less chance of static lifting the vinyl to the tape prematurely. I've used both ways and both have some benefits 1 Share this post Link to post Share on other sites
pshawny 410 Posted September 29, 2014 Last year I broke down and bought the double shaft 24" Weber Made. My tape sits about 4" higher than the table and 22" back from where I lay the left end of the vinyl. Measurements are to the center of the roll. I also have the tape aligned to one edge of the table so that I can simply align the vinyl to the edge and apply away. The BIG SQUEEGEE is most excellent at applying app tape. Share this post Link to post Share on other sites
louis clarke ii 202 Posted September 29, 2014 Last year I broke down and bought the double shaft 24" Weber Made. My tape sits about 4" higher than the table and 22" back from where I lay the left end of the vinyl. Measurements are to the center of the roll. I also have the tape aligned to one edge of the table so that I can simply align the vinyl to the edge and apply away. The BIG SQUEEGEE is most excellent at applying app tape. You lost me at "I bought an double shaft" Share this post Link to post Share on other sites
pshawny 410 Posted September 30, 2014 You lost me at "I bought an double shaft" As in that's where you started laughing and couldn't stop Share this post Link to post Share on other sites
Go-C Graphics 856 Posted September 30, 2014 I don't remember who suggested it but I've been doing the upside down method for large graphics. It has saved me SO MANY headaches. Apparently I suck at applying app tape because my vinyl graphic is always wavy. Share this post Link to post Share on other sites
pshawny 410 Posted September 30, 2014 I don't remember who suggested it but I've been doing the upside down method for large graphics. It has saved me SO MANY headaches. Apparently I suck at applying app tape because my vinyl graphic is always wavy. I tape some small stuff with the app tape sticky side up. I think your having trouble the regular way because your app tape rolls don't have core plugs and flop around when they are pulled, plus they are allowed to shift from side to side, which won't keep your tape inline with the vinyl and will cause massive wrinkle issues. Some core plugs, washers, and set collars or hose clamps and you'll be in business. Share this post Link to post Share on other sites
kylesmash 36 Posted September 30, 2014 I am sure that there are many, many members of these Forums who can send you those caps !!!! They're standard in a lot of different brands of vinyl rolls. Personally, I have had great success with this product -- It shouldn't be too hard to reproduce the design: (I clamp it to the table with regular ratchet-clamps) my exact set up. couldnt imagine life without it . although I eventually screwed it to the table Share this post Link to post Share on other sites
louis clarke ii 202 Posted September 30, 2014 my exact set up. couldnt imagine life without it . although I eventually screwed it to the table This is the same set-up I use. Never failed me yet. Share this post Link to post Share on other sites
darcshadow 1,626 Posted September 30, 2014 Last year I broke down and bought the double shaft 24" Weber Made. My tape sits about 4" higher than the table and 22" back from where I lay the left end of the vinyl. Measurements are to the center of the roll. I also have the tape aligned to one edge of the table so that I can simply align the vinyl to the edge and apply away. The BIG SQUEEGEE is most excellent at applying app tape. The Big Squeegee holds or pushes the app tape, correct? So which method do you use more often, pushing the tape with the big squeegee or the Weber made? And what determines which method you use? Share this post Link to post Share on other sites
pshawny 410 Posted September 30, 2014 The WeberMade holds the roll of app tape at the end of the table, much like the other designs shown in this topic. The 26" BIG SQUEEGEE allows me to apply the tape in one single motion. Share this post Link to post Share on other sites
darcshadow 1,626 Posted September 30, 2014 ah, I was thinking of this one. Share this post Link to post Share on other sites
pshawny 410 Posted September 30, 2014 I've seen that and some of the other hand roll app tape holders. I'm not sure how well those things would work. Share this post Link to post Share on other sites
express2100 154 Posted October 1, 2014 I use my big squeegee exactly like pshawny and it works great. I do tape the leading edge of the vinyl to my cutting mat and pull the app tape 4-5 inches past that to maintain space between the tape and vinyl. Share this post Link to post Share on other sites
pshawny 410 Posted October 1, 2014 That's how I do it too, minus taping the edge. I have done that on occasion though. If the ends won't sit flat then I place a metal yard stick across the vinyl on the end closest to the app tape roll, then slowly move it out of the way as I apply the app tape. Share this post Link to post Share on other sites
Sal316 166 Posted October 1, 2014 Not homemade, but I use the rotator at work. A little pricey, but very convenient: Share this post Link to post Share on other sites
jaybyrd 3,770 Posted October 1, 2014 Not homemade, but I use the rotator at work. A little pricey, but very convenient: Wouldn't take much for a handy person to make one with some plywood and dowels. Share this post Link to post Share on other sites