fbrgraphics 0 Posted January 6, 2009 Spent 6 hours loading not happy maybe its me but someone should say somthing if it dont work with some plotters. Share this post Link to post Share on other sites
haumana 1,221 Posted January 6, 2009 really? dang. give us more specifics ... OS? RAM? Processor speed? and which plotters doesn't it work with? Share this post Link to post Share on other sites
BannerJohn 1,324 Posted January 6, 2009 It's all a matter of finding the right driver. I don't see any posts from you about this problem,until this one. Have you contacted anyone at US Cutter? I've yet to have a cutter that Flexi wouldn't work with. Unless you bought a version that only has one driver because it is tied to a specific cutter. Share this post Link to post Share on other sites
kenimes 42 Posted January 6, 2009 The Bridge Pro 720 is the same as the MH721 USCutter offers, and it uses the Roland PNC-1000 driver in Flexi. Share this post Link to post Share on other sites
Dylan 0 Posted January 26, 2009 The PNC-1100 driver works better. IMHO. Share this post Link to post Share on other sites
kenimes 42 Posted January 26, 2009 The PNC-1100 driver works better. IMHO. Yes, and the cutting width will not be limited to 18.5" on some versions of Flexi. Share this post Link to post Share on other sites
TaterNuts 3 Posted February 7, 2009 Now I rember... It was the Pnc1000 driver or something like that...... But i think that I edited the cutting width in the dll... Share this post Link to post Share on other sites
PBear 5 Posted February 12, 2009 Windows XP MH 721 I've been running SignX with my cutter for two years through the LPT port, then lost my SignX so I bought Flexi 8.6, installed it. found the PNC1000 driver for my cutter, set up everything then tried a test cut and nothing.... the program dosen't find the cutter.. O'well I have so much work to cut right now.... Share this post Link to post Share on other sites
