Search the Community
Showing results for tags 'sign blazer'.
Found 9 results
721 cutting plotter
Guest posted a topic in VinylMaster CUT, LTR, PRO & DSRHi All - please help ! I have a 721 cutting plotter I'm using with SB Elements. Firstly it seems to want to cut everything in mirror (even after I've ticked or unticked the mirror box). Also it doesn't want to print along the roll, just crossed it A friend mentioned it could be because the X and Y Axis are incorrect ? I'm lost here !
Cutting with TWO Programs
KMCreations posted a topic in SignBlazerHi Everyone, I was wondering if it was possible or not recommended to cut with 2 programs. I was previously using Sign Blazer Elements, but bought a new cutter and now have VinylMaster Cut. I am not familiar with VinylMaster Cut and have all of my other files on SBE. Is there a way to cut from both programs without messing anything up?
Cutting with TWO Programs
KMCreations posted a topic in General discussionHi Everyone! I just received my new USCUTTER MH721-MK2 and it came with the VinylMaster Cut program. I was previously using Sign Blazer and I am very familiar with that program and have all of my designs on that program. I got my vinyl cutter working with the new program but was wondering if there was a way to set up my Sign Blazer and my VinylMaster Cut program to use the same cutter without messing anything up! Thanks for your time!
Sign Blazer not cutting project
KeystoneChuck posted a topic in SignBlazerI have had my cutter (PCut) for almost five years now with the occasional hicup. I just ran into a problem where my project stopped cutting in the middle of the design. I was doing a 34" long saying and it stopped about 22" into it. Thought it was hiccup and moved on. Noticed it is only cutting when you send it to cutter and it gives you a display of the cutter with the item being cut the rest where it is past the cutter (right side/infeed roller) is not being cutting. I foung that if i press the "cut" again that it continues but where it stopped it cuts completly vertcally through all my letters. This is something new to me. I have in the past cut tons of 96" long banner/truck graphics in one cutting with no problem. I recently had US Cutter talk me through an update of SignBlazer software because of the "count down timer" issue. No count down timer (was up tp 800 for past year) but know this. Any help out there before I call US Cutter?
Please help figure out why node edit is being goofy
Carluv_11 posted a topic in SignBlazerHello everyone, I really hope that somebody can help me figure out why signblazer is acting weird on me. Im trying to work on a vector in signblazer and when i click on the node edit button there is no lines that are connecting the nodes, it looks like connect the dots. I have been using sign blazer for two years and this has never happened. I need to work on stickers asap but is hard when i cant edit anything.
Signblazer / US cutter error message --- need help
cheerket03 posted a topic in SignBlazerI need help, and I have tried everything. I have a US Cutter MH 721 and have no problems until last week. I have owned the cutter for almost 2 years, and my mother-n-law own it before me (with no problems). Well last week I was sent a file from SignBlazer to the cutter, and the cutter stopped cutting. I was connected to the USB port on the cutter to the USB port on my laptop. The program still works, and I can hit the test button on the cutter and it works. I tried another USB cord except this time in the program it was no longer finding the cutter in "setup". My husband and I tried uninstalling the drivers and reinstalling, nothing! We tried uninstalling and reinstalling the SignBlazer software, nothing! We opened up the case, and my husband noticed the USB port was loose (he works in the IT field). So he secured it down, and still nothing the program no longer found the cutter. After being frustrated, we ordered a DB9-USB adapter cord. Last night the cord showed up!! We plugged in the cord, installed the drivers for it, and uninstalled/reinstalled signblazer. Nothing!! The program still was not finding the cutter. Well after being frustrated once again, and my husband working on it for about 2 hours last night - we called it a night. This morning while waiting on US Cutter Support to open, I thought I would give it one last shot. I uninstalled/reinstalled the drivers and the software. Followed on the directions on the setup (start.uscutter.com) for the drivers. This time to my surprise the program now finds the cutter. However, now I am getting the following error message, "Can not open the output device. Error initializing cutter." So since support was now open, I called!! The man on the phone was not helpful at all. I explained everything that we have tried, and how this all began. His response was get new software, and then call us back. Yet, I know it is not the software because I can now find the cutter in it. My problem is that the cutter will not cut still. This is why, I am here! What else can I do or try to get this to work??? Thanks in advance!
Need help with this multi color logo please
CADILLAC MAC posted a topic in General discussionHey friends, hope every one is well. i am doing some window decals for a friend, and i have her logo, but i can not figure out how to get it to cut all the colors, im use to always "expand"ing but i dont know what to do when i didnt design the logo. im cutting it in sign blazer also. anyhelp would be greatly appriciated. thanx agin
greeksentsvc posted a topic in SignBlazerI bought a US Cutter YEARS ago.... I still have it and have the Sign Blazer Software, How ever... the computer I was using took a dump. I am trying to re-install the software on another computer and the software is asking for an Activation code. I click to get the activation code, and apparently the registration site is nolonger there. How do I get an activation code for this software? I have the software S/N and everything. but I cant get an activation code.... Any Ideas???
Does Sign Blazer work with a Graphtec plotter?
gotwins posted a topic in General discussionI've downloaded and installed Sign Blazer but I'm having trouble with it communicating with my Graphtec plotter. When I look at the options for the type of plotter the Graphtec isn't listed. Does Sign Blazer even work with my plotter? Also, I'm having some difficulty importing an image to Sign Blazer to cut. For some reason it still thinks the image is a bitmap. I've tried importing the image as an .ai verision 8 file and an .eps file with no success. Any and all help is appreciated. Thanks!