Leaderboard

As a MH owner, I can say that what you are planning can be done with a MH, but if I had it do over again, I'd step up to the SC2 or better. If cost is a big factor, go with the 28" version. UScutter has a 28" SC with stand and catch basket for $450. The 38" MH with stand and no catch basket is about $380, so for only $70 you get a better cutter and a catch basket. And if you're doing long deigns the catch basket will come in very handy as well as the superior tracking of the SC2. I also recommend the 28" cutter because 24" rolls are pretty common, the next size up is only 30" and while still pretty common, is that extra 6" really worth it? Most large designs can be broken down to smaller sections which can also make install easier.

Well this IS Great Britain, they drive on the wrong side of the street, and eat crumpets. In the USA, we call something else logs. (I prefer not to get more descriptive, it's sorta gross)

Calandared like 651 can shrink or expand at a different rate than the metal substrate where. Cast is not going to shrink because of the way it is manufactured and the reason cast is recommended on the vehicles. Reading the forums for each model will give you a good idea of what others have encountered. Skeeter, myself, goose and others that have read all the post for years see the trends and troubles and what we use to make our recommendations.

751 is one of the "Cast" family of vinyl and a better choice for going on vehicles and metal bins. It will handle to expansion and contraction much better and last several years longer as well. 651 is a good product for temporary work but is of the "Calendared" family of vinyl which is made completely differently. What you describe is considered permanent and the added expense is nominal. On the cutter I'm with the majority as well. Yes the SC is a touch more up front but from seeing literally thousands of posts we see a lot more user complaints and problems with the MH. Will it work? Probably. There are several on the forum who either started or still run the MH. They tend to be pretty tech savvy either by nature or from forced need. You will at least get a good education. Just don't say we didn't try to steer you up one level.

Sure will. I've actually been using the forum for a lot off support and advice but today I signed up so will 100% be back Thank you again.