vinylmotivations 143 Posted November 6, 2012 (edited) In several back and forth emails with Craft Edge, We finally have a revision that supports cutting with the built in graphtec driver in SCAL Pro. It requires the cutter be set at HPGL, but it WORKS! Now I have a few issues to work out with it... but it WORKS! 11/7 - The latest revision of SCAL Pro that craft edge sent me seems to be working great on the Graphtec! Cutting, WITH weeding lines. Now to challenge them with contour cutting UPDATED 11/9 - Another small update working with Craft Edge! CE5000 is cutting in HPGL and GPGL modes as well as Contour Cutting in GPGL. Craft Edge is working on contour for HPGL as well as, having gotten an FC7000 machine to cut, fine tuning that as well! I am looking forward to really punching this software into solid use for basic jobs! Edited November 10, 2012 by vinylmotivations 2 Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 6, 2012 Yes, just now for it to act properly when either sheet fed or roll Fed as well as handle weeding boxes and lines. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted November 6, 2012 kind of like watching a bad version of windows develop after release -- it will get there . 1 Share this post Link to post Share on other sites
BannerJohn 1,324 Posted November 6, 2012 was there ever a good version of windows? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted November 6, 2012 I am pretty fond of windows 7 64bit - Share this post Link to post Share on other sites
Jay2703 704 Posted November 6, 2012 I am pretty fond of windows 7 64bit - Have you seen Windows 8 yet? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted November 7, 2012 Have you seen Windows 8 yet? not yet - the test computer I was going to put it on I ended up selling Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 7, 2012 It looks terrible! 1 Share this post Link to post Share on other sites
mopar691 281 Posted November 7, 2012 I am loving windows 8. absolutely wonderful. Waiting for sai to upgrade flexi then my rip station all my design stations will upgrade to it. Discs are in the trays ready to spool up!! Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 7, 2012 It probably would work well on my All-in-one 24" touchscreen.... Share this post Link to post Share on other sites
mopar691 281 Posted November 7, 2012 Works better on desktops with a mouse. With the new multiple monitor support it is so much better than 7, the desktop side is top notch. runs clean, efficient and fast. I am booting on less than 30 seconds with a reg drive and around 10 with a ssd. Push button, sit down and bam, its up before I can look. Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 8, 2012 The latest revision of SCAL Pro that craft edge sent me seems to be working great on the Graphtec! Cutting, WITH weeding lines. Now to challenge them with contour cutting! Share this post Link to post Share on other sites
speleopower 46 Posted November 8, 2012 Woah woah slow down with the contour cutting....lets get .eps file support and node editing first :-) So far I"m becoming more and more happy with the software except the node editing. -Scott Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 8, 2012 I mentioned the wireframe option to them, reporting that the lines are too bold, hoping to hear back yet tonight as most of my correspondence with them takes place between 8 and 11pm central time. Software, once it is working is very very easy to use. Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 8, 2012 CE5000 working, HPGL and GPGL both are functioning with weeding lines. Have not been successful at print/cut operations. Namely because the software is not configured as of yet for Graphtec registration marks for the CE5000. Although it does work with the cameo, they just need to port over that portion of the driver and build/bake it into the software. Share this post Link to post Share on other sites
vinylmotivations 143 Posted November 10, 2012 Another small update working with Craft Edge! CE5000 is cutting in HPGL and GPGL modes as well as Contour Cutting in GPGL. Craft Edge is working on contour for HPGL as well as, having gotten an FC7000 machine to cut, fine tuning that as well! I am looking forward to really punching this software into solid use for basic jobs! Share this post Link to post Share on other sites
odokie 8 Posted November 29, 2012 I just received my "Sure cuts alot PRO" where it asks to choose your cutter ,Graphtec is not an option. Reading this I hope I didn't make a mistake purchasing this! What option/cutter should I choose? Thanks for any and all help! Mary Ann Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted November 29, 2012 Have you upgraded to the highest version of Sure Cuts A Lot Pro. ? You need to. Go to their site and upgrade. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted November 29, 2012 Graphtec is on the trial version I have of SCALP.. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted November 29, 2012 Go here for latest versions,,, support and downloads.. http://www.craftedge.com/support/lostsw.php Share this post Link to post Share on other sites
odokie 8 Posted November 30, 2012 Thanks! I will play around with this program this weekend and see if I can get it to work for me! One more question, If I have SB on my computer there should be a problem having this program on the same computer should there? Thanks again! MAry Ann Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted November 30, 2012 there should be no problem, with having 2 programs on your computer. Share this post Link to post Share on other sites
ACJ GRAPHICS 29 Posted October 3, 2014 HOW DO YOU GET THE GRAPHTEC TO CUT THE SIZE THAT SCALP SHOWS? MINE WILL SHOW 6" THEN IT CUTS LIKE 2.75 IN IN VINYL. DRIVING NE NUTS Share this post Link to post Share on other sites