Leaderboard

Thanks so much, I'll give vinyl master a shot. I'm new to vinyl cutting, I don't know why I was so wrapped around cutting master. Probably because the videos I watched and software on the graphtec site with little to no other info on other softwares for plotters. Vinylmaster worked... y'all are awesome. Thank you. I don't know why my endless google searches never came up with vinylmaster.

Sounds a lot like you are still thinking in terms of raster graphics and not in the terms of vector graphics the plotter uses. Conversion programs don’t work well with vector graphics that require tracing to make them readable with arcs and nodes instead of pixels. Vinyl master is a solid choice, I had several ce5000’s and they work with many softwares made for plotters

For $59. you can purchase Vinyl Master cut from Vinyl Master.com. and be on updated software. It's a download. Inkscape.org is Free design software. and they keep it updated. Open source. Export as .eps. import into Vinyl Master. I'm sure at 15 wasted hours, $59 is pretty cheap. You can even download demos. Cutter needs to be on Command HP-GL. Some people still use Signblazer, but it hasn't been updated for many years also, Uses version 8.eps. Not everything is free. Professional software costs $1000's. Example. Flexisignpro.

Hello everyone, I got my first heat press on Saturday (photo attached) and right off the bat I had issues. Firstly, the instructions were not written by anyone who usually writes or speaks english,, very poor wording and spelling. Secondly, the photo of the controller unit was completely different than the one that came with my press as well as the instructions on how to use it. Thirdly, I had to search the internet to find instructions on how to use the controller I have. Even then, nothing was cut and dried, I had to play with the controller and after about two hours I finally figured out how to use it so the press would work properly. If anyone has the controller unit in the attached photo and needs help with how to use it please contact me and I will help you.

¿Intentaste alguna de las sugerencias de este hilo? Sería más fácil si nos hiciera saber lo que realmente ha probado, entonces podemos guiarlo desde allí. [Did you try any of the suggestion in this thread? It would be easier if you let us know what you have actually tried, then we can guide you from there. ]