Leaderboard

What design program are you using? The basics are there in that file, you'll just have to build the outer gold ribbon pieces that they don't have included. Looking at the pic the ones on the old vehicle are not all that well done anyhow so I doubt you'll make them any worse. I noticed that the lower brown stripe is not quite aligned equally between the yellow stripes. I ungrouped the elements an then did a distribution center between those three peices and the brown now looks much better in relation to the end of the other piece that it is supped to be a part of. There are several weird alignment issues as well. Time to learn your software. I had a few minutes so I fixed this one, hopefully it will help you out. Ambulance Vinyl.eps

thank you ! for anyone wondering for this plotter u have to have adobe ai 2014 so it connects easy to master cutter 2 . first install ai then master cutter because master cutter installs the plug in!!!!!!! happy cutting!!!!!!

I've had to use the HT55 for my 631.

Hello, here is a quick rundown of the steps to take. 1. create a design using a Vector program (Inkscape, Adobe, etc.) 2. EXPORT the design as .eps file 3. IMPORT that file to the cutting program

Playing with my daughter this afternoon and she decided to dress like a biker. Decided she needed a shirt. Not done yet, but the concept is there. Probably change the colors a bit. The BC and not MC stands for bicycle club.

You should not be lifting the vinyl off the backing. Properly done is to squeegee the front of the transfer tape real good, then turn the decal transfer tape down and peel the backing away. It makes a huge difference. If you keep trying to lift the decal off the backing, you will actually lift the wax paper up with the decal, then it will be stuck to your decal. I even write that on my instructions. I never have complaints or problems. Oracal 631 has transfer tape made for it. And it is high tack. https://www.uscutter.com/ORATAPE-HT55-Decorative-Film-Transfer-Tape-for-631-Vinyl

stageman, welcome. What does that mean "not sticking" ? Buy some high-tack tape. See if that works. ORATAPE HT55