Another truck graphic from Moody...go figure
First time I have messed around with wrapping a cut graphic. Avery SW900 Matte Black....will never use any other material for vehicles after the ease of working with this. I have used it for solid wraps before but combined with R-Tape this was the easiest install I have done...even easier than my standard 4x4 decals with 751.Thicker material needs higher cut pressure but this would not have been possible to wrap around the bed using the 751 I would have normally cut this from...plus the air-release grid makes application a breeze and no need for a wet install. Applied both rear graphics, side sponsors (also cut from the Avery), trimmed, and post heated within an hour. I think there was more back and forth discussion on the design than actual production and application time.