Super Moderators
  • Content Count

  • Joined

  • Last visited

  • Days Won


darcshadow last won the day on October 22

darcshadow had the most liked content!

Community Reputation

955 Excellent


About darcshadow

  • Rank
    Advanced Member

Profile Information

  • Gender
  • Location
    : Azle, TX
  • Interests

Recent Profile Visitors

10,236 profile views
  1. darcshadow

    new prismcut plotter announced by uscutter

    Jet aircraft are quieter than MH's. lol
  2. darcshadow

    new prismcut plotter announced by uscutter

    No, the depth is NOT fine. 1/2 credit card is about 10x to much blade exposure. Follow Mz. Skeeter's instructions for setting blade depth. You only need about 0.003" of an inch of blade exposed.
  3. Not a Graphtec user here, but sounds like he's wanting to hit a button on the machine itself. So unless there is a setting in the machine itself not to return to home after a job I suspect using the copy button on the machine will not work the way you want. In the software, does the cut screen stay up? Could you just hit cut again or something on the computer? That's how I do it with VM.
  4. darcshadow

    My subs almost up !

    Depending on what all you're doing, Inkscape might be an option to look at. It is free and extremely powerful. I think I've seen on here mention where it is closer to corel than AI in learning how todo stuff, so will probably be a pretty good learning curve as well, but it's hard to beat the price. Inkscape also works well on WIndows(hate the term PC, all computers are PCs unless they are a mainframe), Mac, and Linux.
  5. darcshadow

    Cutting Mat/6mil acetate

    6mm? That's nearly 1/4". I don't believe any vinyl plotter can cut something that thick. Now if you mean 6 mil, 0.006", that would might be doable.
  6. darcshadow

    Font help needed

    If you fill in the white space, Whatfontis.com comes back with BenderSolid.
  7. darcshadow

    Beginner Question

    Follow Mz Skeeter's instructions for setting blade depth and then cut as slow as possible to start with, gradually increase speed to something you are happy with and still getting good cuts. Over cut and offset may need to be adjusted as well. What vinyl and cutter? they are not all created equal and if you have a MH or other low level cutter cutting 1/8" letters may simply not be possible.
  8. darcshadow


    Have you followed Mz Skeeter's instructions for setting blade depth?
  9. You could try Inkscape if you need something in a pinch. Inkscape is not designed as a cutting program but it does offer that ability and is not terrible to use. As a hobbiest, I used it exclusively for several years for cutting.
  10. darcshadow

    Pix Max help

    I think you may still have too much blade exposed. If you can see the blade in a photo, you probably have too much. You only need about 3 mil (0.003") sticking out.
  11. darcshadow

    Engstrom Graphics - Demolition Derby Signs

    That is actually one of the Confederate Navy's flags which was based on the battle flag of the army of Northern Virginia which was led by General Lee. The battle flag was actually a square rather than the typical 3x5 rectangle. I just like to spread accurate yet useless information.
  12. darcshadow

    need help finding font

    asking you to load stuff when you click the download button or after you extract the zip file? If it's when you click the download button you are probably not clicking on the correct download button. Often times what looks the obvious button is not the real button you need to click, it's an ad of some sort. You have to pay close attention to download the actual file you want. If you can't do it or find it on the web page you're looking at, go to a different web page that offers the file.
  13. darcshadow

    Engstrom Graphics - Demolition Derby Signs

    Which one, there were 6 of them.
  14. darcshadow

    Vinyl colors

    I bought the starter pack like 5 years ago and I still have most of those colors left. I mostly use that vinyl for blasting and powder coating mask and use the Oracal that I bought later for any real jobs. Later when I got into HTV I learned my lesson, I have a stock of a few colors I use often then just buy the others as needed. I do always buy extra so I have enough to do a few extra designs if I mess up, or the customer decides they want more.
  15. Check your cutting stripe and make sure it's not damaged.