Warrior1 0 Posted March 9, 2019 So I was successful in landing my first decal gig but feel like I under priced it to get the job. Is there a formula that you use based on square inches/feet, etc, weeding complexity or? Any help is greatly appreciated. Share this post Link to post Share on other sites
Dakotagrafx 7,298 Posted March 9, 2019 for newbies we generally have them start at length + height and divide that by 2 for single color jobs - later you can adjust for complexity, size, qty - Share this post Link to post Share on other sites
Wildgoose 4,200 Posted March 9, 2019 Best part of that project is you will gain real world experience. Even if you make no money at all the knowledge gained has value. My first 6 months of owning a cutter I did every single job for free (all to friends and family). One was a whole 12ft enclosed trailer. Yeah I spend a few hundred on materials and dedicated many hours to those projects but I learned a LOT and had no repercussions for what I now understand were subpar cut/installs. The cuts weren't too bad but the installs were rough the first few. That's not an answer though. I have heard some say $0.07 or $0.08 or even $0.10 per sq inch depending on how tough the weed. That works ok for small stuff but on larger stuff I generally go $6 per SF for cast vinyl and sometimes drop to $5/SF for calendared ( per color). I measure that in actual used space like if the decal is actually only 5"x 6" it fits in a 1 ft box therefore $6. If it is 12" x 10" it's actually going to encroach not the second foot on the 12" side by the time it gets cut and has a weeding box etc so it would be 2 x $6 = $12. If the design is 22" tall by 4ft long it would be $48 for the first color. If the second color was only 8" tall by the 4 ft they would go for the single ft high price of $24 for a total of $72. It has always worked for me and seems to be about the expected rate for my area. Everywhere is a little different I think. Share this post Link to post Share on other sites