OWJones 1,981 Posted March 23, 2013 As I recall it uses an allen wrench (which should be included) or a phillips head screwdriver (not included), to assemble the stand. The screws that hold the cutter to the stand have large plastic heads so they can be put in with your fingers. Share this post Link to post Share on other sites
gcextreme 475 Posted March 23, 2013 I had a little time to play.... My first good cut...had 3 oppsies.. Share this post Link to post Share on other sites
mopar691 281 Posted March 23, 2013 What program you using? Share this post Link to post Share on other sites
gcextreme 475 Posted March 23, 2013 Created it in illustrator then cut in signblazer..but I have to use the copam driver Share this post Link to post Share on other sites
gcextreme 475 Posted March 23, 2013 It cut fine i think..i think i have the blade depth set fine...i just need to work on the pressure settings... Also is there anywhere i can buy a dust cover for the cutter?? Im going to order some more blades too...any suggestions? Whats the best way to transport the cutter and stuff safely? I have a booth at my chapters bike show in april and want to set it up there. I did get a cheap dell laptop too...using that ....$80 from a local pc store... I got the graphtec software and signblazer installed on it...gotta get my illustrator on it later.. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 23, 2013 I have a cover or the graphtec for 24.00 - on bladees - call ross and get the orum discount on the 60 degree cleancuts - I go thru about 1 a year clancutblade.com Share this post Link to post Share on other sites
gcextreme 475 Posted March 23, 2013 Ok cool..got pics of it for me? $24 include shipping??? Got paypal? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 23, 2013 http://forum.uscutter.com/index.php?/topic/23725-cutter-covers/ Share this post Link to post Share on other sites
slice&dice 2,451 Posted March 24, 2013 Whats the best way to transport the cutter and stuff safely? I have a booth at my chapters bike show in april and want to set it up there. This is an interesting topic, I decided to start a new thread about it. MOBILE CUTTING SET-UP and TRANSPORT http://forum.uscutter.com/index.php?/topic/39799-mobile-cutting-shows-booths/?p=304341 Share this post Link to post Share on other sites
gcextreme 475 Posted March 24, 2013 Thanks... --------------------- i have a bike show April 13th.. and want to bring my cutter to cut some stuff at the show and sell... we just had our bike chapter's monthly meeting... and alot of my fellow riders are very interested in some stuff.... im not sure what other local events i could go to...but for now our bike show is going to be my number one priority... what really sucks is... i know alot of them will want some harley davidson stuff....and it being copyright is an issue.. but i will be able to do alot of other basic motorcycles stuff i can do..... Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 24, 2013 keep in mind that Harley is probably the hardest on cw - they send people to shows and swap meets to look for stuff. persaonlly I think they must pay a reward from what I have seen. I have steered clear of it after reading a bunch about it. heck they even go after people that use thier shield with other words in them! Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted March 24, 2013 Yes, I even read here in the forum, that someone had a relative that is Harley legal, that goes to shows,looking for Harley copyrights, that his appearance would not even give you the impression that he is a legal representative of Harley.... . So just guessing, I would say he looked like a hard core biker dude.. You have no clue who all goes to those shows, just by appearance, doing under cover work... Share this post Link to post Share on other sites
gcextreme 475 Posted March 25, 2013 Hey guys...im in the hospital now....possible appendix issues...goin for a ct scan soon Share this post Link to post Share on other sites
jessehop 6 Posted March 26, 2013 that no fun bud get well soon so ya can get back to cutting.. u can text me if u want while u wait Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 26, 2013 ohhh that is so bad timing - hopefully they will find it is something not as serious - get better soon Share this post Link to post Share on other sites
gcextreme 475 Posted March 26, 2013 well i last nite i had a CT scan... my appendix was fine...but they wanted to do an ultrasound to check my gallbladder and kidneys, so i went back in this morning for that....now im just waiting for the results........and of course the bill.....thank god i have insurance that will pay for about 70% of it. Share this post Link to post Share on other sites
slice&dice 2,451 Posted March 27, 2013 You're in luck, Glenn, there's a special on gallstones this week from USCUTTER. http://www.uscutter.com/Silhouette-Craft-Rhinestones-Emerald-Green 1 Share this post Link to post Share on other sites
gcextreme 475 Posted March 28, 2013 You're in luck, Glenn, there's a special on gallstones this week from USCUTTER. http://www.uscutter.com/Silhouette-Craft-Rhinestones-Emerald-Green HAHA NOT FUNNY Turns out i just have a bacterial infection in my large intestine and colon They got me on some meds. Anyway.. i need some help with this graphtec... Ok first, the blade is a 45dg. blade, does it matter which way it goes into the holder, and which way the holder goes into the carriage? In other words, which way should the blade angle be when cutting.... u would think toward the rear?? Next, i did get the blade depth set so it would cut thru the vinyl but not the backing....but when i try to do cuts... it cuts better on the right hand side of the machine and does like nothing toward the center and left side (using a 24" wide roll")... Force is at 27, speed is at 8, quality at 2..... For quality is higher number better or not? Trying to learn here, but dont want to waste alot of vinyl.. i have the 651 oracal and some of the indoor wall removable stuff (got two rolls of that, red and black) Point me in the right direction... Im sitting here on my laptop, working on my collection, trying to get this cutter set up correctly, and do a few small cuts...all while struggling with stomach and abdominal pains..... hard to focus... Share this post Link to post Share on other sites
mopar691 281 Posted March 28, 2013 Sounds to me like you don't have the holder all the way down in the mount. Make sure the top of the clamp is all the way over the flange on the blade holder. Share this post Link to post Share on other sites
gcextreme 475 Posted March 28, 2013 Wow...ur good..just saw that...lol... Im just under the weather...from being sick...cant think right...today at work was a pain....kept forgetting tools and stuff...and would get into my machine ready to work and realize i forgot something..had to crawl and climb out to go back to my tool box...too many times...i was there for 9 hrs and probably got like 4 hrs of stuff done.. Share this post Link to post Share on other sites
slice&dice 2,451 Posted March 28, 2013 In other words, which way should the blade angle be when cutting.... u would think toward the rear?? Cutter blades fit into a special holder that has bearings, allowing the blade to spin freely 360* When the entire cutting head moves, the blade is dragged along, and it'll rotate in whichever direction it needs to. On a personal note, honestly, it's fortunate you 'only' have a bacterial infection, which is the best-case scenario from all the alternatives you faced. Get well soon. Share this post Link to post Share on other sites
gcextreme 475 Posted March 28, 2013 Oh ok cool..i didnt think it rotated... Thanks... I gotta be at work at 8am in 20 mins...if im going....i feel horrible. Share this post Link to post Share on other sites
gcextreme 475 Posted March 29, 2013 for cutting the 651 oracal vinyl... what is a good setting for the force, speed and quality?? for quality is a higher number better quality??? I just did a cut of a skull... the larger pieces came out and weeded just fine, but the smaller ones didnt...they were still connected to the parts i needed to weed out.... Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 29, 2013 in ve-lxi-master plus I just add a little to the overcut (same as flexipro) Share this post Link to post Share on other sites