carolinatc 0 Posted September 6, 2010 What would be the best substrate for a 48''x96'' sign.? It's going on a corrugated metal building(not flat) also it's facing east and gets hit hard with morning sun. Thanks! TC Share this post Link to post Share on other sites
rrc1962 0 Posted September 6, 2010 Alumacorr, C-Bond or colored .040 aluminum. Personally, I like Alumacorr. There are also some pre finished wood products, but they are not any cheaper than the aluminum products. More in some cases. Share this post Link to post Share on other sites
ff-extreme 6 Posted September 6, 2010 I like the Alumacorr also and I have been using a lot of PVC sheets lately 1/4 or thicker Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted September 6, 2010 +1 Alumacorr Share this post Link to post Share on other sites
Shrikezero 0 Posted September 6, 2010 I've always had trouble with PVC not holding up well in direct sun. Also I'd be leery of mounting it against the corrugated aluminum. I think you'd have problems with heat. Share this post Link to post Share on other sites
carolinatc 0 Posted September 6, 2010 Thanks for the info.! You guys are the best. TC Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted September 7, 2010 Alumacore or Dibond Share this post Link to post Share on other sites
Spyder Graphix 0 Posted September 13, 2010 If you have a Grimco around you check out MaxMetal. It s is about half the price as alumacorr and just as good if not better. It has a thicker metal sheeting Share this post Link to post Share on other sites
neron15210 10 Posted September 13, 2010 Grimco offers it as Max Metal N Glantz offers it as Omega bond 2 sided aluminum with plastic core between . Very durable and reasonably priced. Share this post Link to post Share on other sites