Search the Community
Showing results for tags 'cutting master 3'.
Found 9 results
-
Cutting Master 3 cannot find my Cutter
BFCD posted a topic in GraphTec Cutting Plotter Support Requests
Hello All, I recently purchased a Graphtec CE6000-40 Plus Cutter, there seem to be a few issues and I am just completely lost at this point. We are trying to use the CorelDraw 2017 Macro with Cutting Master 3. BUT! Cutting Master 3 cannot see my cutter. we are using the USB to USB-B connection from the cutter. I cannot figure out why the software will not see the cutter. On top of it not seeing the cutter the Cutting Controller Software is giving me the Error for Code 1104. I installed the proper driver based on my cutter. I was told the installation should be a breeze, but nothing wants to properly connect to my cutter. I even tried everything while switching around from HPGL and GPGL... I am completely at a loss.-
- ce6000-40 plus
- cutting master 3
- (and 3 more)
-
Graphtec CE-6000-60 cutting on the wrong spot
IBprint posted a topic in GraphTec Cutting Plotter Support Requests
Hello guys n gals, I hope someone could get me out of this very annoying problem. I just bought a Graphtec Ce-6000 and im trying to do a print and cut. But when it starts cutting it does it on a very different spot then where the image is. I use: Adobe illustrator CC with the Cutting master 3 plugin. And for this using Neenah transfer paper A3 size. I made a print layer and a cut layer with registration marks. i then print it and then send it to Cutting master 3. But it seems it doesn't seem to find the registration marks. I think it doesn't even search for them. But ARMS is on.. What am i dong wrong? I hope someone can tell me. And what are the correct settings to use?- 6 replies
-
- graphtec ce-6000
- ARMS
-
(and 3 more)
Tagged with:
-
Graphtec CE5000-40 Not Syncing ARGH!!!
JeannePapa posted a topic in GraphTec Cutting Plotter Support Requests
Hi! I am am new here because I have a problem that I just can't seem to fix. I have read all over this forum and different forums on how to fix this problem and I just can't seem to get it to work. So here is my issue: I am working with Adobe Illustrator CC 2015 and it informed me that I needed to upgrade to Cutting Master 3. NBD, I downloaded the plugin and moved it to the "Plug In" section of my AI folder. I opened AI, selected my art and opened up the newly downloaded CM3. No problem. However I can not get it to sync at all. It just sits there syncing and never actually syncs. So according to everything I read, I reset the software in my computer to the factory reset. I then reset the actual cutter (turned on the machine while holding the UP arrow). I changed the setting from HL to GL in the Command heading on the actual machine. I have restarted both my computer and the plotter every single time. But still it is not syncing. I have also reattached cords and such. I know the computer is talking to the cutter since when I open the CM3 software my cutter makes a noise every single time. So there is some communication happening. But just not any cutting. AHHHHH!!!!! I need some help! Any ideas on what to do next? I am desperate! My job is due first thing tomorrow and I have nothing!!!!! -
Hello All! So I got a new iMac, running OSX 10.12 Ive always used cutting master 2 because 3 never worked on my MacBook Pro. I want to use CM3. So Im always synching mode when I try to cut (see image). Im set at GP-GL. Cutter status light flashes then nothing... HELP please. Thanks!
- 1 reply
-
- synching
- graphtec cutter
-
(and 4 more)
Tagged with:
-
ADOBE ILLUSTRATOR AND CUTTING MASTER 3 HELP
elitegraphics951 posted a topic in Competitor Cutter Help
I TRY TO SEND A JOB TO CUTTING MASTER 3 FROM ADOBE ILLUSTRATOR CC AND IT WILL NOT OPEN ANYTHING, JUST CUTTING MASTER.... HELP??- 13 replies
-
- adobe
- cutting master
-
(and 5 more)
Tagged with:
-
Having problem with those little pesky tips where the blade stops and starts its cuts, Alright for large cuts but for small details weeding is a pest. The tips keep pulling up the cut vinyl, I have tried several settings. Including: Offset 0-5 Speed 8-15 Acceration 1-5 Cutforce 15-25 and Tried the Tangential either off or on and different mm settings. ANYBODY? What is the best settings. Should I set the Tangential cut, is this like overcut in the SC cutters? I am using ClearCut blades , NEW ( Remfact) CE 5000 windows 8 Cutting Master 3.
-
ADOBE ILLUSTRATOR AND CUTTING MASTER 3 HELP
elitegraphics951 posted a topic in Competitor Cutter Help
I TRY TO SEND A JOB TO CUTTING MASTER 3 FROM ADOBE ILLUSTRATOR CC AND IT WILL NOT OPEN ANYTHING, JUST CUTTING MASTER.... HELP??-
- adobe
- cutting master
-
(and 5 more)
Tagged with:
-
Short of cutting one, then reposting the roll, then cutting another, is there a way to cut multiple documents on one pass?
-
Anyone successfully use Airport Express as a wireless print server?
Lollimotion posted a topic in GraphTec Cutting Plotter Discussion
Hi, New to the Forum, but impressed by your helpful posts. Issue: Two inkjet printers print fine from the Airport Express USB print server port, but can't link the Graphtec EC5000 plotter via Cutting Master 3 from Illustrator. Otherwise, the plotter cuts excellent when plugged directly in the laptop's USB port. Anyone successfully use Airport Express as a print server for the CE5000? Anyone? Thanks, chris- 4 replies
-
- airport express
- graphtec ce5000
- (and 5 more)