MZ SKEETER

I use illustrator CS2.... Open up Illy. If you go under FILE and click BROWSE .. all my documents load up to be viewed,, Make sure that is what you have clicked on the left side when it opens. The place you have your files. If BROWSE is shadowed out, then click NEW then Browse. You can select to look at most anything on your computer Just schroll down them.. ,, Hope that helps

not really, it all depends on how far your blade is sticking out, no one has there blades at the same distance out on each machine. Not to mention people using different brands of blades and degrees,, alot of different variables will cause this.

what software are you using to vectorize it? You are right, not cuttable,

great start, hope to see more

they are nodes, you add nodes with the Bezier path tool... looks like a pen. also at the top of your main layout screen is HELP, click it , then Help topics.

thanks so much for taking the time to write all that. I really appreciate it,,

why are you using the Roland pnc driver? Your cutter is listed, In brands, go to US Cutter,, then in models, select your cutter

can you explain how to use the Flexistarter 8.6 contour cutting,, I have tried to read the instructions, but just don't understand it.. please help

welcome from Indiana also

love my Graphtec

is there a reset on the software? Sorry, I don't use Signcut, was trying to find something in a thread http://forum.uscutter.com/index.php/topic,23674.0.html

found this What is Baud? Contrary to popular belief, baud is not a direct measurement of data transfer speed, but instead it measures how many electrical signals are sent per second. Baud is used to measure the rate of electrical signals, or "signaling elements," for modems, networks, serial cables, and other data transfer mediums.

What version of windows are you using? I also have Flexi, maybe this will help you,,, go into the Production Manager and change the Packet size to 1000 KB, you will have to actually erase and enter the 1000, click apply and ok, or try reinstalling flexi

great work, thanks for sharing..

did you send him a PM? call tech support.

http://all-free-download.com/graphic/vector-file/vector-flower/search/tulip.html http://www.clker.com/clipart-14026.html

the laser point is the same machine as the Pcut, it just has the laser on it.

contact Signcut,, on their website. that is the only place you will get the real info.

trying to help a friend.. who has a Graphtec CE50000 2009 unit, How do you disable the media sensor on your unit? I have FC7000mk2-75 and they have different buttons and etc. for how to use the machine. I'm sure someone out there with a CE5000 newer 2009 unit can help him out. Maybe I am calling it the wrong name, BUT I disable the MEDIA SENSOR on MY unit, to stop the machine from doing the premeasure of the WIDTH of the piece of vinyl in the machine, before cutting, then tells you what the cut area is. Is it called MEDIA SENSOR on the CE5000 series also? thanks in advance..

not a problem, if you are going to do a lot shipping, I purchase my boxes from www.uline.com they have most any size.

you can roll it vinyl out

have your tried just uninstalling SignBlazer and doing a fresh install? the link is in the Signblazer thread. Sorry, I don't use SignBlazer, or invest in a more stable software.

I only use USPS, with delivery confirmation, no insurance, UNLESS very expensive say $100 or more, I do not use tubes, I use boxes, and roll loosely,

just call tech support

what driver are you using ? also did you try to do as XP mode?