arty-rc 719 Posted April 18, 2014 I've been trying to get this logo cut ready and am having no luck. I tried using Inkscape but had couldn't get it right. All I need is one of the logos simplified down to 3 or 4 colors so I could cut it. Thanks in advance. Share this post Link to post Share on other sites
skarekrow 1,842 Posted April 18, 2014 Here's a quickie... may not be exactly what you're after. There are several ways that it could be handled. May want to do a little node work if you want it really tight. nrgLogo_02b.svg nrgLogo_02b.eps 5 Share this post Link to post Share on other sites
Wildgoose 4,200 Posted April 18, 2014 Nice work as always Skare Share this post Link to post Share on other sites
arty-rc 719 Posted April 18, 2014 Thanks Skarekrow. I'll start working with it asap. Share this post Link to post Share on other sites
skarekrow 1,842 Posted April 18, 2014 Happy to help. Share this post Link to post Share on other sites
arty-rc 719 Posted April 19, 2014 Had a chance to make a 10" sample to show my customer tomorrow. Thanks again Skarekrow. Just noticed that I layered it in the wrong order. The blue tailpiece is under the fuchsia. The final ones will be done properly. 3 Share this post Link to post Share on other sites
skarekrow 1,842 Posted April 19, 2014 That looks good... prolly glad you dont have 150 units to do though, huh? I would vouch for print at way less than that. 1 Share this post Link to post Share on other sites
arty-rc 719 Posted April 19, 2014 I'll find out how many he wants and take it from there. 2 Share this post Link to post Share on other sites
joker 618 Posted April 21, 2014 That does look good... Share this post Link to post Share on other sites
mr300s 1,272 Posted April 22, 2014 Yes both of you good job Share this post Link to post Share on other sites
djque 246 Posted April 22, 2014 Nice work both of you Share this post Link to post Share on other sites
