Search the Community
Showing results for tags 'used'.
Found 3 results
Hello! I have been using a Vinyl Express R Series II 24" vinyl plotter for about a year now. Needless to say, I have certainly outgrown it, and need something bigger and better. I found a listing in my area for a used Mutoh Kona 1400 55" cutter. I've worked with a Mutoh LFP in the past, but not one of their cutters. The price is reasonable, and I could easily pay for it in one job or two. My questions are: Does anyone else use the same cutter? Is it worth purchasing used? Could I use LXi Expert with it? I'm still doing research on my own, but I wanted to check here and see if anyone else would recommend buying this cutter. Thank you in advance!
jleworth posted a topic in PrintersHey guys, I was hoping to gather some insight and get some advice on exactly what I should look for before purchasing a used solvent printer. I first got into the sign making industry to create my own custom signage for my food concession business. I started with and still have only a cutter but I have since got into making signage for others as well as myself. Recently, I started working for a company that specializes in vehicle wraps for the concession industry as an installer and have seen the many advantages of having a digital printer. I have decided that I would like to purchase a printer for myself and have searched high and low on Craigslist for a used machine that will fit my budget. A few days ago I found a Roland SC500 54" printer/cutter for sale for under $350 and I have contacted the seller and arranged to meet up tomorrow morning. I wondering if anybody out there could give me some information on what I should look for before buying one of these machines used. What I already know about this printer is that it has sat for a few years and it will probably need new printheads, it has been converted to Eco solvent, it has heaters, in its current state it is capable of cutting, and I know that it is big, old, and slow. I did a Google search for the printheads and (please correct me if I'm wrong) found that it requires (2) DX2 printheads that aren't made anymore but seem to still be available online from a few suppliers. I have found the printheads for as low as $250 so even if they both need to be replaced, I will still be under $1000 total. What concerns me most are the other components that I am, at this point still somewhat unfamiliar with, like the pump(s), dampers, and capping station. Is there a good way to check if these other parts will also need to be replaced without the ability to print a status report? Is there anything else that anyone can think of that I should check out? Let's say that the previous owner used the printer and then, without any cleaning or flushing, let it sit for a few years, what parts would need to be replaced in order to get it up and running again? I've purchased a lot of used equipment and have come across quite a few things that weren't worth what it would cost to repair. From what I have read, even if that is the case with this printer, parting it out on eBay should get me my money back. What do you guys think? Is this a good deal? I have watched YouTube videos and read dozens of articles trying to answer the questions I've asked and I seem to remember coming across something somewhere that mentioned I should secure the heads or the carriage prior to transporting a printer. If I decide to buy this machine, it will ride in the back of my truck for about 30 miles on smooth road to my shop. Is there anything I need to do as a precautionary measure before transporting it? Thanks guys!
I am the newest of the greenhorns in the cutter world, i purchased a used Tc model cutter from a gentleman whos uncle passed away. Unfortunately he cannot find any software or any drivers that might have come with it or any that his uncle may have purchased. My question is, where to start? I have flexiSIGN10 however i the TC model doesnt come up when trying to install my Uscutter. am i just stuck with a cutter that wont work because of the lack drivers? Im searching for downloads and any guidance would be greatly appreciated.