TTSF 0 Posted September 4, 2008 I received my cutter, install the software but don't know how to install BLADES or get it to cut with USB. Seems as though everyone has to buy a USB - Serial converter? Please help. I know it works because when I push the test button, it moves but I dont see cutting because I didnt put in any BLADES (no instructions). I need Step by Step Instructions if anyone can help. Thanks! Share this post Link to post Share on other sites
TTSF 0 Posted September 4, 2008 Also, when I go to cut.....its printing to my default printer attached to my computer.....?? Share this post Link to post Share on other sites
tdp 0 Posted September 4, 2008 I got this from a helpful person last night.... only one blade at a time. blade goes into the blade holder (the cylinder looking thing). Fat end of the blade goes into the hole opposite of the chrome pin plunger. the cylinder top and bottom can rotate. You need to put the blade in than turn the cylinders in opposing directions until the tip of the blade sticks out about a half of a credit card thickness (seriously Share this post Link to post Share on other sites
TTSF 0 Posted September 4, 2008 Hello. Thanks for the info but Im still lost. Do you have any pictures? Share this post Link to post Share on other sites
Rodger 527 Posted September 4, 2008 I don't know how to help you with that model , but do a search & there proably is posts with pictures in them . regards , Rodger Share this post Link to post Share on other sites
TTSF 0 Posted September 4, 2008 Thx. I figured out the blade thing on my own but I still need help with the other stuff.... Share this post Link to post Share on other sites
Rodger 527 Posted September 4, 2008 your welcome . I & MANY others have went thru the same thing . Still read as much as possible & you won't duplicate questions as much . The search thing works good also Share this post Link to post Share on other sites
haumana 1,222 Posted September 4, 2008 Read my post about 1/3 down the thread. Hopefully that'll help you. http://forum.uscutter.com/index.php/topic,9270.0.html to the forum!!! Share this post Link to post Share on other sites