Lil' Angel 0 Posted July 15, 2021 Delete if wrong forum, I'm curious as to what other people are doing with scrap vinyl that is too small for 5 inch decals/ wall vinyl to small. would like some ideas Share this post Link to post Share on other sites
darcshadow 1,626 Posted July 15, 2021 Throw it away. I'll hang onto some small pieces but for the most part they end up just laying around. Vinyl is cheap and the hassle of dealing with small pieces is just not worth it. 1 Share this post Link to post Share on other sites
Wildgoose 4,200 Posted July 15, 2021 I have a junk bin that I throw it into but rarely pull any out for anything very constructive. It makes decent tape and we do a lot of t-shirt press work which leaves a lot of lint around the workspace and I use the scraps as a sort of lint roller/tape and wipe up the lint from my press and work table. 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 16, 2021 If it isn't 6" x 18" at a minimum, I just toss it. I'll accumulate some 'strips' of vinyl from 30" rolls that I run through for jobs that are only 22" wide (and I don't have any 24" on hand) -- but those narrow leftovers are normally 8'-16' in length, and have value. Strips are good for DOT#'s 2 Share this post Link to post Share on other sites
arty-rc 719 Posted July 17, 2021 I use my scraps for masking off my glassware before sandblasting. 2 Share this post Link to post Share on other sites