Worble7 15 Posted April 6, 2019 So I have the graphtec CE6000-60 and using graphtec studio NOT pro and when i'm in design page project is there i can see it and everything works fine. once I switch to Page or Cutters my project is gone I can't find it. Any ideas where it went? Thanks for your help Jeff Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted April 6, 2019 I get a little lost when you say you go to page or cutters - if you mean that when you click plot/cut that nothing shows in production manager my best guess would be there are no vector graphics in your design - raster graphics will not cut as they are made with pixels and not lines and arcs 1 Share this post Link to post Share on other sites
haumana 1,220 Posted April 7, 2019 Ditto. Whatever your design is, it's not vector. Vectorize it first, then the cutter will be able to interpret that for cutting. Share this post Link to post Share on other sites
Worble7 15 Posted April 14, 2019 Thanks for the help I did not trace ugh. Jeff 1 Share this post Link to post Share on other sites