Dakotagrafx 7,293 Posted January 31, 2017 14 minutes ago, cardudenc said: I used just a few drops of super glue on the places it sagged, but most held. problem with that is you probably super glued the adhesive tape to the cutter - that failed adhering tot he cutter - it might still release from the other side of the tape. on the camper I removed that tape but on the truck I just made sure the adhesive silicone caught on each side of the tape so the led's were secure Share this post Link to post Share on other sites
cardudenc 150 Posted January 31, 2017 Quote so far so good, its still sticking Share this post Link to post Share on other sites
Primal Decals 621 Posted February 1, 2017 11 hours ago, dave_dj1 said: I have to say I am disappointing this morning Half of the strip has fallen down, not sure what to use to stick it back up. I may have to look for some 3m tape. The light strip seemed sticky enough but I guess not. i used rubbing alcohol on mine before applying led light strip. and it has held from day one..Maybe the person you got them from doesnt use a good as adhesive as my guy which was a 3m tape. 1 Share this post Link to post Share on other sites
Dakotagrafx 7,293 Posted February 1, 2017 Now I don't doubt that there could be a difference in adhesive but all 5 or so sets I bought said 3m on tape, I just don't believe most of them had real 3 m tape on them :/ 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted February 1, 2017 @term_paint Share this post Link to post Share on other sites
su-z-q 8 Posted February 26, 2017 cool beans, i mean lights! Share this post Link to post Share on other sites
PixelPusher 46 Posted March 1, 2017 FINALLY got all my lights/remote/batteries/connectors. Haven't attached them yet but I will eventually. Took 35 days to ship from China through eBay. I still haven't got a bunch of other purchases I made through eBay during the Christmas break but I'm glad these at least showed up. Probably won't get a lot of the other purchases either and have filed for refunds on several items...but that's another horror story. DO NOT EVER BUY FROM CHINA DURING THEIR NEW YEARS! I did not factor that in when buying initially...big mistake. Anyhow, the lights are eyeball searing bright! Proper bright white color. The power bar is kind of big and bulky (but very light - if not cheaply made). The remote takes a single CR2025 lithium type battery which I had to order separately from eBay too (got a deal on 5 Maxell's for $4 shipped from another province but that only took 4 days to arrive). I have a roll of super adhesive 3M tape already I will use to secure them to the cutters since I see others are having some difficulty with the stock adhesive tape. I'll just skip the hassle and use the 3M stuff right off the start. There are no instructions on how everything goes together or works together except for the remote. The remote does all kinds of fancy light tricks but I'm just interested in good old On/Off and the brightness settings. The lights themselves do have a kind of weird electronic smell to them initially. It could be that they were improperly cooled since I left them coiled up on the roll when I was testing them. I hope that will dissipate eventually when adhered to my cutters. The lights, by default, started to flash in a rhythmic sequence when I first plugged them in. You need the remote to change the sequence to not flash. I didn't have a battery for the remote initially so I couldn't adjust anything until it was functioning. After I got that worked out, the lights turned off and on in a normal fashion using the remote. No more flashing. It wasn't rocket science to figure out how it all went together but still, it would have been nice to find a cheap photocopy printout on how it all connects and how to trim things to fit without screwing anything up. I may do up a quick instruction thread here for the forum thread when I get a moment for others to refer to. Anyhow, I'm pleased things have arrived and I can now install them. I still think this is a brilliant idea. I'm VERY surprised USCutters doesn't adopt/borrow (steal) this idea...It is a definite value add to a standard cutter. Share this post Link to post Share on other sites
PixelPusher 46 Posted March 1, 2017 On 12/17/2016 at 1:08 PM, Primal Decals said: Glad to see i started something cool lol. I think your idea is awesome! Thank you for sharing it with us 2 Share this post Link to post Share on other sites
Primal Decals 621 Posted March 1, 2017 2 hours ago, PixelPusher said: I think your idea is awesome! Thank you for sharing it with us lol Thanks .. Share this post Link to post Share on other sites
SeeJaysPlace 476 Posted March 3, 2017 On 12/7/2016 at 2:38 PM, Primal Decals said: here is mine i posted. yep, guess what i'm going to do tonight hehe 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted December 1, 2017 On 12/10/2016 at 3:17 PM, Primal Decals said: My next table will be bigger !! @mchldelf Share this post Link to post Share on other sites
Primal Decals 621 Posted December 1, 2017 On 12/7/2016 at 2:38 PM, Primal Decals said: here is mine i posted. @mchldelf Share this post Link to post Share on other sites
