seanb6a4 0 Posted April 21, 2016 So I have a customer who wants some graphics done for their store front. My cutter is a 25" cutter, and these graphics are wider than that. My question is, how do I split the graphic in 2 pieces to cut and put it together after its cut. Thank you guys! Quote Share this post Link to post Share on other sites
dwp99 283 Posted April 21, 2016 Panel or Tile I use Flexi but Vinyl Master should have a panel or tile option. Quote Share this post Link to post Share on other sites
VinylMaster 148 Posted April 21, 2016 Please search this forum as this question has been asked and answered. Quote Share this post Link to post Share on other sites
GraphxNMore 282 Posted April 21, 2016 Can you run it vertical through your cutter? Quote Share this post Link to post Share on other sites
VinylMaster 148 Posted April 22, 2016 It really does depend on which level of the software you have. If Cut, then there is no tiling. If Ltr you would have to set the artwork up ahead of cutting or use Rotate in Send to Cut. If Pro or Xpt you can use a Cut Document to more or less set it up in any way you like. This is all covered under the Help (menu) > Help Topics > Cutting and Plotting Quote Share this post Link to post Share on other sites