Vector 8 Posted March 25, 2015 Has anyone had any luck using SB on a Table Titan? I searched the forum and found a post about how to for a Titan 2 and I tried that and it seems like SB sent the "command" but my cutter didn't do anything I have done a test cut through inkscape so I know the cutter works , just really love SB and would hate to move on to SureCutsalot 1 Share this post Link to post Share on other sites
shankun 14 Posted March 25, 2015 it does work. have to select the port you wish to use, change the baud rate, I am not by the cutter computer now but i can look it up for you if needed edit: basically trial and error Share this post Link to post Share on other sites
Vector 8 Posted March 25, 2015 Trying now , were you connected by usb? [EDIT] Holy poop I got it working , thanks for the heads up! 2 Share this post Link to post Share on other sites
shankun 14 Posted March 26, 2015 yes it was connected by usb. and no problem man! glad you figured it out. 1 Share this post Link to post Share on other sites
ljsportsmom 1 Posted March 30, 2015 I can't seem to figure mine out. I'm right with you I like my SignBlazer but I'm ready to pull my hair out.. If you could help it would be great. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 30, 2015 I can't seem to figure mine out. I'm right with you I like my SignBlazer but I'm ready to pull my hair out.. If you could help it would be great. typing in titan and sighblazer into the search box brought up about 10 threads on the subject - looks like most used the copam 2500 drivers once they had all the titan drivers already loaded in . .. . Share this post Link to post Share on other sites
shankun 14 Posted March 31, 2015 Just like dakota said. make sure you change the baud rate to match that of the cutter. Share this post Link to post Share on other sites
Vector 8 Posted April 1, 2015 Yup, got mine to work with cutter setting Copam 2500 and messed with the baud rate and 9600 did the trick for me 2 Share this post Link to post Share on other sites
ljsportsmom 1 Posted April 2, 2015 Thanks gonna try it.. Share this post Link to post Share on other sites
jmeimerstorf@gmail.com 2 Posted October 14, 2015 I am going to try this too! I thought it was impossible! There is hope! Share this post Link to post Share on other sites
slice&dice 2,451 Posted October 15, 2015 I am going to try this too! I thought it was impossible! There is hope! Let us know when you get it connected finally --- there are several threads concurrently running with you seeking advice on having SBE and the Titan to get talking to each other. http://forum.uscutter.com/index.php?/topic/50162-does-signblazer-work-with-the-new-titan-3-cutter/?p=405426 Share this post Link to post Share on other sites
mb20music 760 Posted October 15, 2015 there are several threads concurrently running with you seeking advice on having SBE and the Titan to get talking to each other.http://forum.uscutter.com/index.php?/topic/50162-does-signblazer-work-with-the-new-titan-3-cutter/?p=405426 Shame on you LOL Share this post Link to post Share on other sites