racerx 0 Posted December 29, 2013 Have a MH 721 and cutting fine detail in t-shirt vinyl,what spped should I set my cutter to? Share this post Link to post Share on other sites
joker 618 Posted December 29, 2013 I have a SC brand cutter and i use 200 speed Share this post Link to post Share on other sites
racerx 0 Posted December 29, 2013 I have it set at 500 for normal cutting,figured I start by setting at 250. Just did not know if that was to slow. Thanks. Share this post Link to post Share on other sites
joker 618 Posted December 29, 2013 Oh no not to slow.. There is a member here that i believe cuts everything on 100 speed Share this post Link to post Share on other sites
Ravenwind / One Off Grafx 187 Posted December 29, 2013 i run mine 90 to 100 all the time but if it is really fine i grab a new blade and go about 50. Share this post Link to post Share on other sites
smokeybearfan 87 Posted December 29, 2013 i run mine 90 to 100 all the time but if it is really fine i grab a new blade and go about 50. That's what I run mine at also. I have went down to 30 on very small cuts. Share this post Link to post Share on other sites
joker 618 Posted December 29, 2013 What brand of cutter are yall using. I have the sc cutter and stay at 200 Share this post Link to post Share on other sites
Ravenwind / One Off Grafx 187 Posted December 29, 2013 871-MK2. If I am running 16"letters I will speed it up, other then that I like it to run slow. Share this post Link to post Share on other sites
arty-rc 719 Posted December 29, 2013 On fine detail I have found that cutting slow is always best. There is a very little chance of missing areas and lifting vinyl. The few more seconds it takes saves the time having to do the job over. Less detailed work and larger cutting can be done faster. 3 Share this post Link to post Share on other sites
jaybyrd 3,770 Posted December 30, 2013 And most cutters use their own scale for rating speed so you really need to compare within the same product line to get an accurate mark. Just remember that small and slow go hand in hand. Share this post Link to post Share on other sites