Kazuale 0 Posted May 28, 2013 I am searching for a cutter that can cut vinyl thick enough for blasting stones and boulders. Right now I am considering the Copam Professional cutter. Does anyone do stone blasting? I would also be curious to know what else I could do with the same cutter. Thanks, Bill Share this post Link to post Share on other sites
MadHatterGraphix 1,258 Posted May 28, 2013 Buy what you can afford. Go higher up than the MH series. For vinyl they have sand blasting stencil I'm using regular Avery vinyl. Share this post Link to post Share on other sites
jaybyrd 3,770 Posted May 28, 2013 Stone blasting like gravemarker type stuff? Definitely want a real high quality machine to cut through the extra thick sandblast material you will need. Share this post Link to post Share on other sites
skarekrow 1,842 Posted May 28, 2013 I think Bren handles that type equipment... http://www.breninc.com/Marking-Equipment-Stencil-Cutters-College-Grove-TN.html Here's a YouTube of them cutting some pretty heavy stuff. I've cut this 21 mil (?) product with my Lylu TC; http://www.uscutter.com/index/page/product/product_id/2275/category_id/52/product_name/Sandblast+Stencil+ (took nearly all 500g of downforce that it had, though ) Share this post Link to post Share on other sites
xJoey Dubsx 42 Posted May 28, 2013 I've cut thicker stuff, just copy>paste the image over it self a few times and hope it doesnt jog. Share this post Link to post Share on other sites
OWJones 1,981 Posted May 29, 2013 I've cut thicker stuff, just copy>paste the image over it self a few times and hope it doesnt jog. Most software will allow you to make multiple passes - much easier to work with a file that doesn't have the same image stacked up multiple times - just an FYI... Share this post Link to post Share on other sites