SC 631 Cuuter -- which driver do i use

[mr_nibbles 0]

Hi

I have installed sign blazer and just need to know which model from the set up screen i need to choose to use the SC series plotter

Thanks

[Dr12volt1338 116]

I believe the SC is a rebranded LiYu cutter try one of those..... I am pretty sure I have read that on here try the search bar at the top.

[mr_nibbles 0]

hi thanks for that ... but it doesn't list the liyu or the sc in sign blazer so wanted to know which one to choose from the list

[Dr12volt1338 116]

There is a link here in the signblazer section for the UScutter All Cutter download. That one has the drivers for the LiYu on it.

[MZ SKEETER 4,709]

Use the download from user CUT ME, it works. I think it's the 3rd post down...

[slice&dice 2,450]

The trick to this is installing the "cracked" SB (eliminating the start-up registration nag screens) and that UK version will contain drivers for hundreds of different machines.

LiYu HF-1202 is the correct driver, having sufficient cutter parameters for 34" width.

[mr_nibbles 0]

anyone got the link to the download

and do i need to install a driver pack?

thanks

[mr_nibbles 0]

sorry for asking about the links but the forum board is just so confusing for SB

I just want to remove the trial and add the correct machine driver ..

Really Sorry

[Dr12volt1338 116]

3rd post down from user cut me....... The crack took me a few times to get the correct file located but it does work once you do.....

http://forum.uscutter.com/index.php?/topic/20104-full-version-signblazer-download-all-cutters/