slmann 1 Posted June 18, 2011 Got a question about centering some text in a image. I've attached the project for everyone to look at. It's an oval with a two F's mirrored back to back. It's pretty close to being center but it's about an 1/16 of an inch off. Is there anyway to have signblazer automatically center in the middle of the image or is it just trial and error until you get it right. Thanks in advance for any help. ftflogo3.SBD Share this post Link to post Share on other sites
slmann 1 Posted June 18, 2011 here it is cut. http://www.fordtruckfanatics.com/gallery/data/745/medium/IMAG0064.jpg Share this post Link to post Share on other sites
deth502 39 Posted June 18, 2011 create one horiz and one vert allignment line by clicking on the top and left sidebars. grab the oval near the center. move it towards this cross point. it should automatically "snap" there. now do the same for the "ff" thing, and it will also snap to teh center of that cross. that should do it. Share this post Link to post Share on other sites
Rodger 527 Posted June 19, 2011 I use the align feature . I center it horizontally & vertically , then do the same for the next item . ( i did not look at your file ) . Some visual centers are not the actual centers so I adjust . Share this post Link to post Share on other sites
slmann 1 Posted June 19, 2011 both those suggestions work. Thanks for the help Share this post Link to post Share on other sites
