Gunner 0 Posted August 12, 2010 Hi Everyone I'm looking for advice. I'm looking at these cutters and was wondering which you would recommend. They kinda of look the same but maybe one is better than the other? Refine Goldcut 24 Refine Ecocut 24 Creation Pcut 24 Uscutter MH-721 Or I was also looking at the MH-871 34". I'm kind of up in the air on whether I would use the extra width. I'm mainly using this to cut stuff out I want to sandblast Any feedback would be great!! Thanks Eric Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 12, 2010 Haven't seen any reports on the Goldcut or Ecocut too new. Older Refines seemed to be better than newer Refines. Pcut was just brought back, and people seemed to like them better than the Refines. . . If you can afford it, buy a Graphtec. You will never regret it. Just do some searches in here for the cutter names and see what results you get on it. Share this post Link to post Share on other sites
roxanneupnorth 106 Posted August 12, 2010 Do not overlook Zencut Black...... Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 12, 2010 Or the Copam, people seem to like them alot also. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 12, 2010 of the choices you listed the p-cut Share this post Link to post Share on other sites
Gunner 0 Posted August 12, 2010 Thank You for the Input! I think I'll be hanging out here alot! Eric Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted August 13, 2010 of the choices you listed the p-cut Share this post Link to post Share on other sites
Guest Posted August 13, 2010 of the choices you listed the p-cut Im with Dakota on this one. Share this post Link to post Share on other sites
Stuff4Toys 2 Posted August 16, 2010 I don't know about any of the other models, we have the MH-871 and love it. The only issues we have is, it looses contact with my USB port from time to time and when putting a weeding box around long images it will not track straight, in 8' it's 1/8" above on one end and 1/8" into the letters on the far end. JOhn ><> Share this post Link to post Share on other sites
hrawlins 0 Posted August 17, 2010 I have the the refine MH721 I've had it for about 4 months for my vinyl lettering business . I have not been too happy with it and am glad that I didn't pay more than I did for it. I am in the process of looking into buying either a Graphtec or a Roland hoping that all the problems I'm dealing with now will be gone (considering the price difference they BETTER be gone). My refine cuts things crooked if the design is fairly large (I have the 24" cutter). And it almost NEVER matches the cuts IE when it's cutting out a letter, the beginging cut does not meet with where it ends. So I have to get my exacto knife and make cuts in the vinyl to even the cut out so that when I weed it, it won't start to tear and stretch the letter out. I hope that makes sense. Anyway, things are taking me twice as long because I have to go through the entire vinyl image and fix all the cuts in the vinyl that the cutter failed to cut correctly. I've put an ticket order into US cutter and never heard a word. Not great software that comes with it either. It only somes with a trial version (that never expires) but it did not say that when I bought it. I wish I could have just started out buying a better cutter but wasn't sure how well my business was going to do. Share this post Link to post Share on other sites
hockeygirl 30 Posted August 17, 2010 And it almost NEVER matches the cuts IE when it's cutting out a letter, the beginging cut does not meet with where it ends. So I have to get my exacto knife and make cuts in the vinyl to even the cut out so that when I weed it, it won't start to tear and stretch the letter out. That sounds more like a blade adjustment issue... offset, blade depth, etc. Share this post Link to post Share on other sites
MikeOswald 0 Posted August 17, 2010 Stay away from the MH series. Go with the Pcut, or Copam if you can afford it. Share this post Link to post Share on other sites
bigjimt 1 Posted August 17, 2010 I have a MH 721... 2 years old and I push it hard at a flea market every weekend every week 3 days and I also have a Omega OM 60 that cost 3 times as much.......I love my 721 but I use it with Flexi-Pro software and Signlab, Cuts fine and starts and ends where it is supposed to. all I Can tell you is do what you think is best.......I have had Roland, Gerber, Newstar, and Refine........ all have worked well but the Sign Blazer to me is Junk..........So I would be looking at software.......... cutters are only as good as the software.......Banner John steared mr to the MH-721 and I have never been sorry..... maybe tomorrow I will be, but not as of yet..........Big JimT Share this post Link to post Share on other sites