LUVnLIFrU 0 Posted November 18, 2009 Does anyone have driver to get signblazer to work on a ROland? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted November 18, 2009 If you have Signblazer, it is listed in the drivers of the Full Cutter version, at lower right of set up page for cutter is a button that says LOAD click it, All the machines are listed. Share this post Link to post Share on other sites
freebird1963 11 Posted January 17, 2010 well i got rid of the nags with this uk verision but lost my refine mh 721 cutter. so how do i get it back or which one do i choose. running on lpt 1 too. Share this post Link to post Share on other sites
Laceylp 1 Posted January 19, 2010 I can't get any of them to work. i just moved and need to put butterflies for my daughters room, she doesn't get that this is her new room! LOL I wanted to add them like her old room had....does anyhone have a working link to download SBE??? Thanks Lacey lacey0304@yahoo.com if file is too large. Thanks again!! Share this post Link to post Share on other sites
pandc 0 Posted January 19, 2010 I got the patch & it said there was nothing in it...so I still have all the nags. Sorry I can't help. Did you try to download it from US cutter?? Peggy Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted January 19, 2010 I can't get any of them to work. i just moved and need to put butterflies for my daughters room, she doesn't get that this is her new room! LOL I wanted to add them like her old room had....does anyhone have a working link to download SBE??? Thanks Lacey lacey0304@yahoo.com if file is too large. Thanks again!! try on this EBAY ad, where is says 5 reasons to buy from US Cutter, #4 Software choicem Download software. http://cgi.ebay.com/NEW-34-Vinyl-Cutter-Cutting-Plotter-USCutter-w-USB_W0QQitemZ300350920860QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item45ee4f589c Share this post Link to post Share on other sites
raguuu 0 Posted February 12, 2010 . So is there no one in the whole world that has a full version of SignBlazer PRO ..... This seems really odd since the author has passed away and no one cares if it is shared or not. I for one need some of the extra bells and whistles I see in the Signblazer Learning Guide. (SignBlazer5 PRO or later) You can get the Elements version here: http://www.jsisign.com/products/signblazer.html Thanks Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 12, 2010 did you download the ALL cutter version,? It has more options than the regular version. and it is 6.0 Share this post Link to post Share on other sites
raguuu 0 Posted February 12, 2010 did you download the ALL cutter version,? It has more options than the regular version. and it is 6.0 Hi Speedoggy! (and thanks)It was my understanding that it was the "elements" version, correct? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 12, 2010 It's the Full elements version, the UK version, with all cutters. Basic 6.0, but it has alot more features to it than regular basic. or what comes on the cd. Your welcome Share this post Link to post Share on other sites
Jay2703 704 Posted February 12, 2010 . So is there no one in the whole world that has a full version of SignBlazer PRO ..... This seems really odd since the author has passed away and no one cares if it is shared or not. I for one need some of the extra bells and whistles I see in the Signblazer Learning Guide. (SignBlazer5 PRO or later) You can get the Elements version here: http://www.jsisign.com/products/signblazer.html Thanks I have the full version. It requires a dongle to run it. Share this post Link to post Share on other sites
MacGrafix 5 Posted February 26, 2010 It's the Full elements version, the UK version, with all cutters. Basic 6.0, but it has alot more features to it than regular basic. or what comes on the cd. Your welcome Speed, where can someone get that version? I would love to have it, because I am now up to a waiting period of 45 seconds with the trial version and it just keeps going higher. Also, I would like to use a lot of the features in the manual that are not in this version. I got this version off the support page from USC for my LP24. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 26, 2010 Go to the top of the Signblazer thread , It is listed there. Good to see ya back. actually on page 1 of this post, LOL Share this post Link to post Share on other sites
battrans 0 Posted February 28, 2010 Hi Is the signblazer still free? I down loaded it it tells me I have to pay for it. True of False? I have it on my office computer but i want to put it on the new computer to cut on my mh721. What can I do? Any Help would be nice Thanks Ron Share this post Link to post Share on other sites
battrans 0 Posted February 28, 2010 Hi went to down load signblazer on a new computer and it tells me to pay is it still free? want to put it on new computer to cut on my mh781. or where do I get the code? any help would be great. Thanks Ron Share this post Link to post Share on other sites
BannerJohn 1,324 Posted February 28, 2010 where are you downloading that it tells you to pay? Share this post Link to post Share on other sites
kartrcr 0 Posted March 18, 2010 I wanted to try the Signblazer but I don't a graghtec CE5000-60 on the list. Is there a driver for it? Share this post Link to post Share on other sites
MrTaz 0 Posted March 29, 2010 Stupid question. What is a dongle? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 29, 2010 a dongle is a hardware devise that allows legit software to run only on the computer that has the dongle plugged in. most of the new ones look like a thumb drive Share this post Link to post Share on other sites
delldude99 0 Posted May 14, 2010 I have been using the US Cutter program for 2 years in the trial mode. Problem is when I do a big project the computer locks up and I have to shut down and start over. I've run cleaning programs and have not found anything wrong with the computer. I would like to get this program fixed or trade in for 2-20's. If anyone can help I would be in debt to you. Thanks Share this post Link to post Share on other sites
insanevinyls 0 Posted July 10, 2010 Patch doesn't work for me here. I wish I could get mine to stop the Trial counter. Share this post Link to post Share on other sites
NetherX 0 Posted July 11, 2010 http://www.mediafire.com/?2jijjjw41hm Give that a go. Follow the instructions that are included. Share this post Link to post Share on other sites
NetherX 0 Posted July 14, 2010 Password to the file is uscutter. Share this post Link to post Share on other sites
Bartman 0 Posted August 1, 2010 Hello, total newbie here. Bought a UScutter LaserPoint a week ago. I downloaded this software and for some reason my cutter doesn't appear in the setup list of cutters. Any idea how to change that? I see every other brand but USCutter in the list. thanks Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 1, 2010 It is a Creation Pcut. with a laser pointer on it. Same machine. Just use Creation Pcut Share this post Link to post Share on other sites