Windshield banner

[UncleCrack 0]

I was wondering what the degree of curve that could be used for making my windshield banners.

Thanks,

Jack

[MZ SKEETER 4,709]

I have been making them for a long time,  I have never arched them,, no problem applying.. there is usually enough space between the letters to flow with the windshield,,,

here is a great video for appying...

http://www.youtube.com/watch?v=_q9EAqSKJgc

[Jay2703 704]

Different windshields have different amounts of curve. this is how I have done it in the past. I will take a long strait edge and lay it across the windshield. Measure the distance where the two sides of the straight edge cross the edges of the windshield. Then measure greatest distance from the arc of the windshield to the straight edge. I create a rectangle with these two measurements and I will use the top corners of the rectangle and the bottom center to arc my text through.

[MZ SKEETER 4,709]

gone

[john! 1]

I don't curve them, they tend to go with the arc of the window anyway

[BannerJohn 1,324]

I don't curve them, they tend to go with the arc of the window anyway

[Ravenwind / One Off Grafx 187]

I have been making them for a long time,  I have never arched them,, no problem applying.. there is usually enough space between the letters to flow with the windshield,,,

here is a great video for appying...

http://www.youtube.com/watch?v=_q9EAqSKJgc

Ah the vid is no longer there.

[MZ SKEETER 4,709]

go to youtube.com   you will find some.

[Ravenwind / One Off Grafx 187]

go to youtube.com   you will find some.

Yeah i keep forgetting which way to curve them but now i have to do a bunch so hoping i wont forget.

.