CRD 9 Posted August 6, 2010 Like Speedoggy said. Connect the keyspan with the USB cable to the laptop or comoputer. Connect the serial cable from the seriela side from the keyspan to the serial port of the cutter. Paco Share this post Link to post Share on other sites
double_down 2 Posted January 8, 2011 Paco, Thanks for taking the time to put the "newbie manual" together. Over the last few days, with the help of your manual, I was able to go from having my cutter in the box to setting it up and cutting my first sticker. Your manual will be a useful reference that I plan to keep readily available. Best reagrds, Kyle Share this post Link to post Share on other sites
elmanortega 0 Posted August 2, 2011 hi i ned help with this a customer is telling me that he can set up his plotter the sistem is asking for this FTDIUN2K.INI controller can you guys help me? thanks Share this post Link to post Share on other sites
KarenR 0 Posted August 21, 2011 Thanks for th manual for us newbies. I have a problem with the SBE setup. I get 2 messages....Coul not create folder C:\Program Files\Cutting Technologies\SignBlazerElements\sbfonts.....and Setup was unable to create the directory C:\Program Files\Cutting Technologies. Error 5: Access denied. What am I doing wrong or how can I fix this? I am not very computer knowledgable and need help. Thanks. Once I get the software to work I am sure the manual will be very helpful. Share this post Link to post Share on other sites
CRD 9 Posted August 21, 2011 Put your question in the signblazer section. Paco Share this post Link to post Share on other sites
steelman 0 Posted September 7, 2011 Thanks Paco This Manual is Great !! Share this post Link to post Share on other sites
gnarbucket 1 Posted September 13, 2011 Oh Bless you !! One of my boys gave me the machine but the directions were blearghhh I couldn't firgure anything out your PDF REALLY helped !!! Share this post Link to post Share on other sites
CRD 9 Posted September 13, 2011 Your welcome guys and girls. Bless the world with your vinyl creations. Paco 1 Share this post Link to post Share on other sites
keith 0 Posted February 28, 2012 Great and Thanks. Got me out of the foggy and going. I know there is still much to learn but I can atleast set my machine up and do some simple cuts now which I could not before Share this post Link to post Share on other sites
speleopower 46 Posted May 19, 2012 I got my SC cutter last night and made the first few cuts using the instructions in this thread. Out of everything I have read and looked at over the last few months before getting the cutter this is the only thread with good easy to understand and use instructions. It took longer to build the stand than to set up the software and make my first cuts. -Scott Share this post Link to post Share on other sites
ewesleyuscutter 0 Posted May 19, 2012 I need a driver for my mh871-mk2,,,, PLEASE PLEASE HELP Share this post Link to post Share on other sites
Dr12volt1338 116 Posted May 20, 2012 I need a driver for my mh871-mk2,,,, PLEASE PLEASE HELP https://support.uscutter.com/hc/en-us/sections/360007520231-MH-MK2-Series Share this post Link to post Share on other sites
ajimaulana 0 Posted February 14, 2013 Many Thanks For Helping Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted October 18, 2014 5 duplicate posts.. go back to the FIRST POST! Your question was answered. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted October 18, 2014 5 duplicate posts.. go back to the FIRST POST! Your question was answered. hmmm - they got thinned a little somehow 1 Share this post Link to post Share on other sites
Cyprian 0 Posted July 12, 2015 Thanks for the walkthrough, 3 months I have been trying to get the cutter to talk to the new computer. Got it working thanks to you taking the time to do this. Share this post Link to post Share on other sites
HManPR 0 Posted July 28, 2016 Hey!!! New to the forums and to the Cutter. Came across this threat from a year ago and don't see any link . It sound very helpful Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted July 28, 2016 1 hour ago, HManPR said: Hey!!! New to the forums and to the Cutter. Came across this threat from a year ago and don't see any link . It sound very helpful looks like the last part of the post with the link is missing 1 Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted July 28, 2016 Think Paco had a more current version but here is the one he posted on vinylforum.org that was still available Noob-V5_0.pdf 2 Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted July 28, 2016 USCutter has a section to help you get going alsohttp://support.uscutter.com/support/solutions/folders/14000106627 2 Share this post Link to post Share on other sites
HManPR 0 Posted July 28, 2016 Thank You! very appreciated Share this post Link to post Share on other sites
Jurian501 0 Posted August 16, 2018 Bumping up this thread where can i find the newbie manual? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 16, 2018 31 minutes ago, Jurian501 said: Bumping up this thread where can i find the newbie manual? look about 3 post above yours - that is the last surviving copy of the manual I know of - vinylforum has since shut down and the one I found in 2016 was the only one still available Share this post Link to post Share on other sites
Jurian501 0 Posted August 16, 2018 52 minutes ago, Dakotagrafx said: look about 3 post above yours - that is the last surviving copy of the manual I know of - vinylforum has since shut down and the one I found in 2016 was the only one still available Thanks found it Still no luck tbh But did make a shout out for help in a new topic Share this post Link to post Share on other sites