Macon Innovations

Priceless

Yeah I've got those little magnetic cards of theirs stuck all over the place....But their instructions have never worked well for me

I use 60 seconds and 400 degrees

You can do your text on arc like normal then select all your text and convert to curves and ungroup....

I sure wish I could get my hands on some of that porcelain here.....They have a website Wildgoose? Might check on getting some shipped

You can pick up a carrier mat.....I use a low tack one made for a cricket....You can get them in 12X12 or 12X24....Then just stick your heat transfer paper on it and run the entire thing through your machine...Just make sure the rollers stay on the paper and not the adhesive on the mat..

You will have to use the 220 in your air eraser , Well that's what I get the best results with mine.....The cabinet though you can go coarser.....I'm using 150 grit White Aluminum Oxide in my cabinet and I am really liking the results....Etches Glass easily and leaves a great finish

Priceless!!!

I am making a 2' x 16' sign and i'm trying to figure out how to cut it in half at the 8' Mark.......Shouldn't there be a setting somewhere that i can just cut it into 2 sections? Thanks in Advance

Another vote for the one in the circle

Nice

Unless you want to spend thousands of dollar's on equipment just stick with simple measurements and a little trial and error

First off I would make sure your machine has enough memory to cut a span that long......

The cabinet from tractor supply is already assembled and sealed....I did add another Layer of foam to the lid to seal it better though.....

I'd say VERY copyrighted

Which version of Vinylmaster is that? Can't tell by your picture

Might start of with an English explanation as well....

Looks good

You can open a picture of your glass in almost any format....Then place the artwork over top of it....use a translucent background png for the top image.....That's how I do it anyway in this software....I did that in this photo for a customer

I will give that a try.....Thanks Jaybird

I can't find it for the life of me

I could do this in scalp and I'm having a hard time believing I can't in this program which is way superior...

Not sure what your asking now?

I think you would have to use a wrap for that one......

I am by no means an expert at this but it looks like that is not the correct tape for your application.....But I could very well be wrong