-
Content Count
2,241 -
Joined
-
Last visited
-
Days Won
40
Posts posted by Primal Decals
-
-
This is actually labeled as 4.063 but it is 4.064.
Whats new? Here is the link. http://www.craftedge.com/download/download.html
- Fixed a problem with cutting with CAMEO 3 cropping off design
- Fixed a problem importing certain SVG files
- Fixed a problem with the Brush and Erase tools
- Fixed a problem with incorrect weed lines
- Fixed a problem with Cut Extras tab cutting rows/columns switched
- 1
-
i use the greenstar transtape for 631, havent had an issue yet
-
-
was this in a business or home.. that almost looks like cigarette nicotine which i have seen happen before when a wall has absorb cigarette smoke for years and then they try to paint over it ,but it never works unless its properly treated... but not with vinyl.Moisture yes...Are you able to go and personally check this .If so i would install a sample piece for my self.. Very strange.
-
Use the USB port,Its the best.. I have the titan 2 28" .. And you dont need another ground on that cutter. Sounds like you bought a used unit? Since you had to buy a new motherboard? If it was used, there could of been issues before with it from previous owner if true..or you are the original owner and warranty ran out.
For the usb port issue. Sounds like a bad connection. I thought mine was acting up once and it was the cable. What length of cable are you running to your Pc etc?
-
Love the Siser HTV easyweed and stretch
- 1
-
3 hours ago, MZ SKEETER said:I heard a few years back that the Greenstar paper tape was Main tape.
Here is the link of what i use.. http://www.uscutter.com/GreenStar-Layflat-Classic-Transfer-Tape-Medium-Tack-Assorted-Widths
-
I use oracal 651,751 etc with the greenstar med tack paper trans tape from uscutter. works perfect and never a issue from anyone in over 2 years .
-
@KC10Chief do you have spreadsheet calculator that helps you in what it costs just in material to make something ?that way you know exactly what it costs in material? Sent you a PM
-
Try @busterbay or @buster . one of them helped me with modding mine to hold more info for my calc i had. But i know the name had buster in it lol.
-
10 minutes ago, MrJoel said:So I went and got a pair of needle point tweezers, but they didn't work. So I took my sharpening stones for my knives and went to town on making those bad boys fine and sharp. The result was a pair of tactical weeding tweezers
you can also use the back end of a bic pen with a small piece of double sided tape on it .that you just dab the stars out with , if you understand what im saying..
Or the weeding tool for HTV that has a really nice hook style on it ,grabs really good. Siser Weeder Pick Tool from uscutter.
- 2
-
im on my 3rd set of carts on mine.
-
@Go-C Graphics-Just over a month or so. Is that too new lol? Found out another bud of mine has had his ever since its came out and he hasnt had a issue either. Thats another reason i decided to get it .
-
No problem bud.What you can do is get one and scan it on a printer as color and then you have a image for tracing etc. Or you can scan it as high res and send me the image and i can go from that as starters. You can also try vector magic as well. Which i prefer to use over scalps trace program,I havent taken the time to learn the trace in scalps yet lol... But i really like vector magics outcome a lot.
-
thats strange,, My epson 7610 has been working like a charm with stock ink.Havent upgraded to the refill carts or tank system yet.
-
On 8/29/2017 at 9:19 AM, MrJoel said:Hey y'all, got a hands on project coming up for a group of guys and gals with Down Syndrome (my little guys both have DS too). Fidget spinners are all the rage at our local advocacy and training center so, hands on wrapping is what we will be doing. I suck at design so any help for the standard 3 sided spinners would help
thanks
If you can get me a photo of one that your going to use and the measurements i will see what i can do to help, but you will need to do some leg work first.
- 1
-
3 hours ago, steved13 said:Totatally new subject, but same newbie ignorance...any reason I shouldn't remove the media basket? I could use the room and I really don't see it's use for me/
My opinion would be ,the catch basket will limit the amount of foreign debris that could get on the vinyl from static build-up .Keeping it on the floor etc just seems common sense. And im not sure if by having it make contact with any other surface could cause static problems but im not sure..
-
47 minutes ago, Dakotagrafx said:first thing I bet you are missing is never have the plotter pull it off the roll, prefeed what you need for the job so it doesn't pull off of the roll
I thought the same thing when i first read it .
@steved13 always pull off what you need for the job your working on. The roll should never be a weight when the material is being cut..Then cut off when its finished.
-
3M Profile
in Vinyl
no problem bud.
-
3M Profile
in Vinyl
oh ok... let me know if you find your answer bud. Ill keep helping as much as possible .
-
3M Profile
in Vinyl
updated previous post..
-
3M Profile
in Vinyl
let me know if you cant read this on this other forum im part of.many people complaining about the 3M IJ35C.
one person said Re-Linearization should be all you need to do ..
here is the post --- https://signs101.com/threads/icc-profile-for-3m-ij35-10-flexi-l25500.110050/
another place, seems possible the answer? -- http://profiles.saicloud.com/
not sure if this is any help since i dont do print or have knowledge in this area..Just trying to help you as much as possible
http://www.3m.com/3M/en_US/graphics-signage-us/resources/color-profiles/
http://www.wideformatonline.com/news/wide-format-news/3417-3m-updates-its-icc-profiles.html
-
Also called join or unite as well if you use ai etc.just a little note.
-
Sorry my pc is still under the knife otherwise i would be helping you out easily.. Take a very good picture and re-create what you need ,Just get accurate measurements.
New SCALPS4PRO Update version 4.064 is out.
in Sure Cuts A Lot Pro
Posted
No problem bud..