-
Content Count
17,521 -
Joined
-
Last visited
-
Days Won
498
Content Type
Profiles
Forums
Gallery
Everything posted by MZ SKEETER
-
Blade in Reference to cutting strip
MZ SKEETER replied to insert's topic in Creation PCUT Cutting Plotter Discussion
just make sure the carriage wheels are in the track, dust out of the track, and the blade holder firmly down in place. -
your welcome... hope it gets you going...
-
start here http://start.uscutter.com/
-
download your file to where you save your graphic files, and import it.
-
your Graphtec is an older cutter. Those are instructions for new cutters that UsCutter sells. Go to a previous post of yours. I answered your question.
-
GraphTec FC3100-60 & SignBlazer - HELP! I can't get them to work together.
MZ SKEETER replied to DeonCarpenter's topic in GraphTec Cutting Plotter Discussion
If you are going to use Signblazer, you must have the cutter on HP-GL. Don't know about your cables.- 16 replies
-
yes, what BannerJohn said. it would have to be a very cheap price, and possibly no replacement parts for it...
-
not even close to a ROLAND, a step above the Refine MH series... It is a Refine GoldCut.. Sold for $229.NEW.. think that was the 14", So a little higher for 24" Maybe around $279-299.00..... UScutter didn't sell them for long.. and not even available on the site. You can check the specs out on the site below. Those cutters are considered VALUE/HOBBY cutters.. I would guess comparable to the SC series being sold now. A Roland and Graphtec are Professional vinyl cutters. http://www.uscutter....CFWgEQAoddiLmSg If you go to 1 of Us cutter ebay pages, it shows comparison of cutters bottom of page http://www.ebay.com/...=item45fdeae128
-
Does Sign Blazer work with a Graphtec plotter?
MZ SKEETER replied to gotwins's topic in General discussion
I just walked a guy thru this... follow this thread,, and yes your image has to be a vector image.. You can't just change the extention on the image, it has to be traced and vectorized http://forum.uscutte...__fromsearch__1 -
MH721 stops cutting mid job?
MZ SKEETER replied to maxitout77's topic in USCutter Refine Cutting Plotter Discussion
here ya go http://support.uscutter.com/index.php?/Knowledgebase/Article/View/57/1/why-did-my-cutter-just-stop-in-the-middle-of-my-cut -
lol JUST FOR the heck of it..... I tried to see what it would do with my own post above. I liked my own post.. but on your own post, it does not give the X below after click LIKE THIS I don't want to hit the X for somebody else. I don't know what it will do.
-
you should contact Graphtec support.. that is a Graphtec web problem... usually maintainence Fixing 503 errors The Web server is effectively 'closed for repair'. It is still functioning minimally because it can at least respond with a 503 status code, but full service is impossible i.e. the Web site is simply unavailable. There are a myriad possible reasons for this, but generally it is because of some human intervention by the operators of the Web server machine. You can usually expect that someone is working on the problem, and normal service will resume as soon as possible. Please contact the system operators of the Web site (e.g. your ISP) to determine why the service is down. They will be in a much better position to help you than we are for this type of error.
- 1 reply
-
- 1
-
isn't that what the check mark "LIKE THIS" button is for? Which is on every post.... It even shows who clicked it... I consider that a thumbs up..
-
cuttin image bigger than it should
MZ SKEETER replied to benjaming's topic in Creation PCUT Cutting Plotter Support Requests
try this, calibrating the cutter http://support.uscutter.com/index.php?/Knowledgebase/Article/View/48/7/wrong-size-cuts--cutting-size-calibration -
it's alright Your welcome
-
see if these gets you anywhere.. works for others http://forum.uscutte...-pro-heres-how/ and from UScutter support http://start.uscutte...-series/mac-osx that Keyspan is the same thing.
-
See if that cd has other formats besides eps. some cds have numerous other formats...
-
LOL I'm the W-O-M-A-N!!!!!!!!!!!!
-
Laserpoint 24 funness Please help the new guy out
MZ SKEETER replied to tfarmer96's topic in LaserPoint Cutting Plotter Discussion
first problem: Screen http://support.uscut...boxes-across-it 2nd problem... a Keyspan adapter is highly recommended. http://support.uscut...iddle-of-my-cut -
also, If your just importing vector art from CDs, You can just import them into Signcut, and cut from there. unless you want to add something to that design...But even if you did want to add to it. you can create in inkscape or Signblazer and export as an .eps. and import into Signcut. , You got a year free with your vinyl cutter. Of Signcut. Have you tried that?
-
most times they are new, when you can't import them.. LOL ... Signblazer has not been updated for several years, due to death of owner. I personally don't use Signblazer, but I have helped some people converting files to older with my Adobe Illustrator CS2. Some files are too new for that, because Illustrator is up to CS5 now. I don't know how Ghostview and the others work. I just downloaded to see if I could... You could try posting an .eps file, and I will see if I can convert back to .version 8, if you want. It may be too new for me also. But I'll try.
-
Your welcome. Yes, you need to change everything,, GP-GL =Graphtec Plotter Graphic Language HP-GL = Hewlett Packard Graphic Language In Graphtec Plotter controller. Go to advanced options,, then COMMAND at the bottom. (lower left on mine)...
-
Now remember, when and if you show use Graphtec's software, CraftRobo and Cutting Master2 you have to go back to GP-GL HP-GL is for any other software like Signblazer, Flexi. Signcut.. etc. glad you got it...
-
yep. I would get that all checked out, before you end up paying OUT, more than you paid in for this... You cannot purchase a contract without the other parties permission. Or documents must support the fact they can be transferred. Those companies, have to have a contract with you...