haumana

Super Moderators
 View Profile  See their activity

  • Content Count

    4,382

  • Joined

  • Last visited

  • Days Won

    172

Posts posted by haumana

  2. Posted

    43 minutes ago, bmxunderground said:

    I've had many people tell me to move up to a Graphtech but I'd like to confirm my cutter is totally dead before giving it up. I'm not a full time business so I don't want to chew off a big cutter expense if I don't have to yet.

    I'm a hobbyist with my cutters, and have always been a hobbyist (for 15+ years) . My original cutter was a LaserPoint (original), and then upgraded to a Graphtec about 3 years ago. Trust me, when I say, do the upgrade. Yes, it's an expense, but I also know that the stuff that I cut with my LaserPoint has paid for Graphtec long time ago. My only regret - I didn't get the Graphtec sooner. My original LaserPoint is still working, but the Graphtec works so much quicker, quieter, and more accurately.

    • Like 1

  12. Posted

    Welcome!

    first and foremost, make sure you have the right blade depth.

    there are several ways to try and tighten it up -
    make sure your blade tip is in tact and not broken off (it can be mighty hard to see)
    slow the cut speed
    use a 60* blade for the more intricate cuts

    what type of vinyl are you cutting? what's the size of your font?

  14. Posted

    Good to know. I cut a few sample decals for them, just so they can double check to see if they want to run with the color they initially chose, and once I have either a confirmation on the chosen color, I'll be putting in my order. I'm just going to keep my fingers crossed that I can get the vinyl fast enough to give myself some time and not be in a complete rush to finish the job. The one and only store that sells vinyl locally only two 10-yard rolls. The only 751 50-yard rolls they carry are white, black, and red; all other colors are in 10-yard rolls, and they only two in stock. That's not even enough vinyl to put a dent in the order. -_-

    • Like 2

  15. Posted

    Thanks. I don't plan on holding on to them. It's just going to be a quick as possible turnaround time for me, then all 300 decals to the customer. I'm not sure how long it's going to sit on their shelves. Nothing I can do about that though. Sometimes I wish I had more business to turnover my inventory faster, but then I think it would feel more like a regular job and might suck all the fun out of it for me :lol:  Clearly I've been self-employed way too long. Hahaha.

    • Like 2

  16. Posted

    That being said, would it better to go medium tack, or high tack, if the customer hangs on to the decals for a while. I have no idea how they are distributing the decals, so there might be some shelf time after the final decals are delivered to them.

    When I use Oratape medium, on the roll, it only gets stickier and stickier as it gets older, because I don't have enough volume to go through rolls on a regular basis. So once those tapes get too ornery for me to use, it goes downstairs and is repurposed as masking/mock-up tape for my laser engravings.

  19. Posted

    I'm in need of picking up some (most likely 24") app tape. My brother sold a job, and after working on the graphic layout, the most efficient layout has me doing the job on 24" vinyl. Not super happy, but cost wise, there's less wasted vinyl going this router instead of going with 15" vinyl. That being said, I'll be shipping in some 751, just as soon as they can choose the right color blue they want.

    Just wanted to know what y'all's preference is for app tape, and why? I've used Oracal MT and RTape medium tack, with each I got mixed results in tack, and peel. I'm hoping to find something a bit more consistent.

    TIA!

  21. Posted

    Process of elimination. Try the cable(s) first. You don't want to just change settings and swap cables out without trying them one at a time. USB and serial cables can go bad, so can the keyspan.

    Did the OS update?
    Did the software update?
    What OS are you using?
    How are you currently connected from computer to cutter?
    Are you running it through a hub/splitter/switch?

    Besides turning the computer and cutter on and off, what else have you tried? Skeeter offered up info about a cable replacement, because she has years of experience, and when things like this happen, that's the first step she would try for troubleshooting. Heck, the would be the first step that most of us would try to troubleshoot.

    • Like 1

  22. Posted

    1 hour ago, dvddvd said:

    Hi thanks I tried that, just by doing the outline but it just looks inflated and the original letter stays the same size which is not 1/2 inch.

    Found another way by making 1/2inch rectangle shapes and stretching the length and angle to fit into each letter. Which is good in one way as it tells you the length of each one and the Led neon can only be cut at 1 inch spacing.

    For any of the curved sections it was a case of using the elliptical tool to make a shape  which fitted perfect and then making a duplicate and then grabbing the corners to make a  smaller version.

    Then a bit of node editing and  weld them together. All a bit long winded

    Thank you for posting your work around. No doubt it will come in handy for future inquiries.

    • Like 1

  25. Posted

    Wild Goose and I are in very similar OS boats. Although the LaserPoint II (LP2) is compatible with Mac, the machine was discontinued long before Apple's M1 chip introduction, so whether that machine is still compatible, will most like come down to software. If you choose to go Parallels or VM Fusion, you will most likely need to run Win10 (minimum), because the versions of Parallels that can run on the M1 is not backwards compatible to Win7 (regardless if you have a disc (or flash drive) for the 64-bit OS or not). I can only hazard a guess that Fusion will be the same. To the best of my knowledge the M1's will not Bootcamp <_<. I'm not a fan of Bootcamp, because I don't care to have to shutdown and restart my machine to get to the OS anyway (on my older Macs). 

    I would reach out to SCALP and see if their Bridge software will run on an M1, and if you have the compatible design software to pair with it. Although, their website says that it's Intel based Mac compatible, so it leads me to believe that some where along the lines, they've tried it on an M1 and it was a no-go. Now if SCALP were willing to send me the Bridge software, I'd be more than happy to test it out for them on M1 with CorelDraw 2019 :P  Force feeding software on to my Mac have gotten exponentially more difficult with the M1 chip :wacko:

    My original LP has been out on loan since before I picked up my M1 machine, so I cannot speak to whether is it could cut directly from Mac to LP, nor do I have SCALP. I have been able to run Sign Blazer, Vinyl Master, and Graphtec Pro Studio via Parallels to my Graphtec.

    The main thing is that you have a working cutter. Worst case scenario, you try to find a machine that runs Win7 and have that be dedicated to the cutter.

    In deed, Quicken for Mac sucks, and it's really not that hard for them to do a Home & Business version for Mac, instead of a watered down Quicken, or needing to jump to the overkill and over-priced QuickBooks. But then again, I'm not surprised since they too have gone the way of subscription based software. Boooo!

    • Like 1