NathanKuwait 2 Posted March 15, 2020 Hello, I'm very new to all of this. I have an issue with the image I have in "sure cuts a lot" that has been vectorized (or I think it has). When I send it to cutter it seems fine, it cuts the image then at the end it cuts two lines straight through the middle of the logo. I completely redesigned the logo yesterday as I thought there maybe hidden layers I didn't see, same thing happened. Would love to hear your thoughts on this. Thank you Share this post Link to post Share on other sites
arty-rc 719 Posted March 15, 2020 Did you register the program? 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted March 15, 2020 arty-rc, you're incorrigible! 1 Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 15, 2020 yup - if not activated it does that very thing 1 Share this post Link to post Share on other sites
NathanKuwait 2 Posted March 15, 2020 Yeah I didn't do that... Thank you, I appreciate it 2 Share this post Link to post Share on other sites
arty-rc 719 Posted March 15, 2020 7 hours ago, slice&dice said: arty-rc, you're incorrigible! Share this post Link to post Share on other sites
Zacarias portillo 0 Posted June 20, 2020 How activate the software a have the same problems??? thanks Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 20, 2020 4 hours ago, Zacarias portillo said: How activate the software a have the same problems??? thanks https://www.craftedge.com/activation/activate.html Share this post Link to post Share on other sites
Zacarias portillo 0 Posted June 20, 2020 I already activate my software, because my name it shows in it, and I wish like to know, why after I cut my design, this one cut a cross line on top of my design, so if someone can help with this I will really appreciate it thanks Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 20, 2020 23 minutes ago, Zacarias portillo said: I already activate my software, because my name it shows in it, and I wish like to know, why after I cut my design, this one cut a cross line on top of my design, so if someone can help with this I will really appreciate it thanks You have not stated which vinyl cutter that you are using on which computer operating system or how you are connected USB or serial.? Or which cutting software you are using. Cannot help without important information. It could be several different things, static, memory, cutter needs grounded.Bad communication. Bad design. Share this post Link to post Share on other sites
Zacarias portillo 0 Posted June 20, 2020 Ok thanks. I have a Mac bock pro, and I have a us cutter my 871 and I have scalp 5 and also I ready instaled the chipset for usb cable. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 20, 2020 The UsCutter Refine 871 is NOT compatible with a Mac. This is right on their ad. It has to be on Windows platform. Your welcome. The MH Series Vinyl Cutter is available in 14", 28", 34", and 50" sizes. Cutter not Compatible with Mac. UScutter website. On Ebay ad PLEASE NOTE:(1) This offer is NOT compatible with Apple/Mac computers Amazon PLEASE NOTE: This vinyl cutter is not compatible with Apple/Mac computers. Share this post Link to post Share on other sites
Zacarias portillo 0 Posted June 20, 2020 Ok if I install a virtual machine whit windows does work? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 20, 2020 I have read that it will work, with Bootcamp and other Windows on a Mac. I don't know anything about using a Mac. You will have to figure that out. Share this post Link to post Share on other sites
Zacarias portillo 0 Posted June 20, 2020 Ok thanks full i really appreciated Share this post Link to post Share on other sites
Zacarias portillo 0 Posted June 20, 2020 I just make sure. can u recomend which does work whit Mac please Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 20, 2020 You will have to ask a Mac user. I use Windows. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 21, 2020 Here is the buying guide which states the info https://www.uscutter.com/index/page/static/subpage/buying_guides_new Share this post Link to post Share on other sites
haumana 1,220 Posted June 21, 2020 7 hours ago, Zacarias portillo said: Ok if I install a virtual machine whit windows does work? Yes, if will work if you Bootcamp, VM Fusion, or Parallels the Mac. As difficult as it may be, I recommend you try and find Windows 7 for that operating system. Windows 10 will want to run auto updates, and that can make things go horribly wrong, even after you get it cutting. Share this post Link to post Share on other sites