RPM Graphics 6 Posted May 13, 2014 My son races motocross and works for Stouter. He is soon going to inherit their business. They bought him this trailer for his racing ventures. Finally got around to getting started with the graphics. This is only about 1/4 of the plan. Will post more as I get time to apply it all. 2 Share this post Link to post Share on other sites
Moody Blue 505 Posted May 13, 2014 This has nothing to do with your work...assuming that you did not create that logo...but I don't like how the nail goes down through the C in construction. I think the design needs to be flushed out to work better for vinyl. Application looks great though! Share this post Link to post Share on other sites
AAndrews19 53 Posted May 13, 2014 "construction" needs a thicker stoke to separate it from the nail. Share this post Link to post Share on other sites
RPM Graphics 6 Posted May 13, 2014 Logo was done by somebody else years ago. I think I see what you guys mean though. The photo above makes it look like the C and the nail are combined. Here is a close-up of how it really looks. 1 Share this post Link to post Share on other sites
skarekrow 1,842 Posted May 13, 2014 Unfortunately, read from further away (normally?) the nail & "C" do conflict. You gotta figure reading distance into the design. A light gray for the nail would have worked better. 1 Share this post Link to post Share on other sites
RPM Graphics 6 Posted May 14, 2014 Unfortunately, read from further away (normally?) the nail & "C" do conflict.You gotta figure reading distance into the design. A light gray for the nail would have worked better. grey nail is good idea. Not hard to do. peel one item off and put one on. 1 Share this post Link to post Share on other sites