Rezmoto 0 Posted October 5, 2010 Im looking to DIY a Application Tape Dispenser. I have seen posts about a DIY thread for these things, but I cant find it. Can anyone point me in the right direction, or post some pictures of some DIY options so I can get an idea of what to build? Also, any DIY's for a holder of some sort for spare 24" vinyl rolls? Thanks! Share this post Link to post Share on other sites
rackitup 0 Posted October 5, 2010 check this out, Hi Greg... Can I answer any questions about our ATWizard? If you look at our website (rcweldfab), there is a video of how it works. If you'd like to place an order, we take PayPal or Visa/MC/Discover over the phone. I can have one ready to go in the morning. Thanks ------------------------------------------- Ross Carlisle RC Enterprises http://rcweldfab.com/atwizard.html Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted October 5, 2010 haven't used my dispenser since getting the big Squeegee . . . Share this post Link to post Share on other sites
cmwyke 0 Posted October 5, 2010 We actually found a wooden paper towel holder at wal-mart that is meant to attach to your wall and we mounted it on the side of our work bench. works great if you use app tape that is smaller than a paper towel roll. Share this post Link to post Share on other sites
xJoey Dubsx 42 Posted October 5, 2010 Made this out of a 2x4 and broom stick. Share this post Link to post Share on other sites
Rezmoto 0 Posted October 6, 2010 Any other good DIY's? Share this post Link to post Share on other sites
kart45 6 Posted October 6, 2010 Here's what I've been using for almost 2 years now... It does need a brace across the top as you come to the end of the tape roll, other than that works awesome for me. http://forum.uscutter.com/index.php/topic,18731.msg146603.html#msg146603 Share this post Link to post Share on other sites
mr300s 1,272 Posted October 6, 2010 I have used this for a while now and works great on large stuff. I got mine from US cutter on ebay. I just waited until I got it for a low price but all of the ones shown will work.... http://www.uscutter.com/APPRoller-Tape-Application-Roller_p_79.html Share this post Link to post Share on other sites
Truckntran 0 Posted October 6, 2010 I have used this for a while now and works great on large stuff. I got mine from US cutter on ebay. I just waited until I got it for a low price but all of the ones shown will work.... http://www.uscutter.com/APPRoller-Tape-Application-Roller_p_79.html x2...but you have to remember to clamp the thing to your bench or screw it down if you don't want to chase your tape down the hall... lol. Seriously.. well worth the investment, this and a big squeegie are MUST HAVES for a professional shop. Nothing against DIY, just sometimes biting the bullet and spending the $$ pays off. Share this post Link to post Share on other sites
tekcorps 50 Posted October 6, 2010 I agree. US Cutter roller and BS here. Share this post Link to post Share on other sites
rackitup 0 Posted October 7, 2010 rackitup the video is not working just go to rc weld fab . com and click on "prodcts" rcweldfab.com greg Share this post Link to post Share on other sites
locknload1 17 Posted October 12, 2011 Save your money, I've been using this $12 one I posted for some time now: Share this post Link to post Share on other sites