patbax2 0 Posted February 21, 2012 Graphtec 50 forum member mr300s uses it. That's it! Thanks its working like a charm now. At first it would feed out like 10 feet of vinyl before it started cutting, but I found another thread with the same problem and got it all figured out. Share this post Link to post Share on other sites
darkchylde802 0 Posted February 23, 2012 hey guys i saw the same ? asked above with no answer when i try to patch it it tells me unknown error 1 patch not installed!!! any help would be appreciated Share this post Link to post Share on other sites
karaoked64 0 Posted February 26, 2012 i just had to get a new computer it has windows 7 when i go to cut it reacts like im off line (pcut630) when i go to set up my usb options are usb001 & usb002 my computer shows port001 and hub001 what am i missing I NEED TO CUT HELP!!! Share this post Link to post Share on other sites
Signs Down Under 19 Posted February 26, 2012 Have you tried using a FTDI driver which will create a USB/SERIAL still using your USB cable... Or a Keyspan adaptor which also creates a serial ? What model Pcut do you have ? Where l bought my cutter l was told if you have a CR series cutter that they are not compatible with a 64 Bit OS... Only 32 Bit. So if your cutter is a CR model and running a 64 Bit OS, this may be the problem Share this post Link to post Share on other sites
sue1812 1 Posted March 3, 2012 How do I apply the patch? after I download it 1 Share this post Link to post Share on other sites
karatemart 0 Posted March 9, 2012 need a link to this Signblazer software that actually works. every link in this thread i tried either doesn't work, or it redirects back to the usc forum. any help would be greatly apppreciated. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted March 9, 2012 need a link to this Signblazer software that actually works. every link in this thread i tried either doesn't work, or it redirects back to the usc forum. any help would be greatly apppreciated. you can start here http://support.uscutter.com/index.php?/Knowledgebase/List/Index/5/signblazer-information 1 Share this post Link to post Share on other sites
jmiller 5 Posted March 11, 2012 wait a moment, I am wanting to use cutting software on my new set up but is this 100% legal to download from the links posted here? Anytime you mention a trial version being fully functional just throws up a concern to me. Thanks everyone Share this post Link to post Share on other sites
Rodger 527 Posted March 11, 2012 It is legal with no gray areas at all . The events are in the SignBlazer section several times if you want to fully understand the history of the software . Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 11, 2012 Is there anyone out there with a sever that is willing to host the full driver version and patch? Apparently, the free file sharing sites are not consistent. Share this post Link to post Share on other sites
Jay2703 704 Posted March 11, 2012 i just created a free account there to upload the uk version with a patch to unlock the elements version. bb http://www.mediafire...be6ba49b5870170 This is the link that I use and it works. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 11, 2012 wait a moment, I am wanting to use cutting software on my new set up but is this 100% legal to download from the links posted here? Anytime you mention a trial version being fully functional just throws up a concern to me. Thanks everyone The company that owned SB no longer exists. When it did, the trial version was always fully functional. You just had to deal with the occasional nag screen. Share this post Link to post Share on other sites
jimmyjam 0 Posted March 16, 2012 Has anyone been able to get the GCC Lynx S-60 up and running? Share this post Link to post Share on other sites
THier 0 Posted March 21, 2012 Do I have any hope of getting my SignBlazer 06 pro working? I need an easy way to do registration marks. Thanks, Tom Share this post Link to post Share on other sites
Jay2703 704 Posted March 21, 2012 Do I have any hope of getting my SignBlazer 06 pro working? I need an easy way to do registration marks. Thanks, Tom Do you have the dongle? Share this post Link to post Share on other sites
THier 0 Posted March 21, 2012 Do you have the dongle? Yes,,, but windows 7 wants a digitally signed driver for it. Share this post Link to post Share on other sites
Jay2703 704 Posted March 21, 2012 Yes,,, but windows 7 wants a digitally signed driver for it. I'm using mine with Windows 7. I found the updated Hasp driver by doing a google search. Share this post Link to post Share on other sites
THier 0 Posted March 21, 2012 What the he,,,,,ck is a hasp driver? Do you still have a link? Thanks, Tom Share this post Link to post Share on other sites
Jay2703 704 Posted March 21, 2012 The Hasp driver is what your computer uses to recognize the dongle. I couldn't get mine to work with Win 7 until I updated the driver. http://www3.safenet-inc.com/support/hasp/enduser.aspx Share this post Link to post Share on other sites
THier 0 Posted March 21, 2012 The Hasp driver is what your computer uses to recognize the dongle. I couldn't get mine to work with Win 7 until I updated the driver. http://www3.safenet-inc.com/support/hasp/enduser.aspx I don't see a specific win7 driver,,,, just use the vista? Thanks, Tom Share this post Link to post Share on other sites
THier 0 Posted March 21, 2012 The Hasp driver is what your computer uses to recognize the dongle. I couldn't get mine to work with Win 7 until I updated the driver. http://www3.safenet-inc.com/support/hasp/enduser.aspx I don't see a specific win7 driver,,,, just use the vista? Thanks, Tom Share this post Link to post Share on other sites
Jay2703 704 Posted March 21, 2012 Here is a link for the Sentinal Hasp. This may be the one I used. It has Win 7 support too. http://www3.safenet-inc.com/support/hasp-srm/enduser.aspx Jay Share this post Link to post Share on other sites
BLAZZ 1 Posted March 24, 2012 I can host the files on my server, but im not sure which one to upload. send my the most upto date files and ill add them and post a link.. Im a new member but have been looking around on this forums for years. Share this post Link to post Share on other sites
mb20music 760 Posted March 29, 2012 The links for the "All Cutter Version" of Signblazer are not working, can someone please update them. 1 Share this post Link to post Share on other sites
mb20music 760 Posted March 29, 2012 Nevermind - the link "cutme" provided seems to be working. 1 Share this post Link to post Share on other sites