MZ SKEETER

they are still showing laser pointers in their Memphis store, and 1 refurbished Pcut, maybe give them a call. http://signuniverse.com/index.php/vinyl-cutters/vinyl-cutters-value.html http://signuniverse.com/index.php/vinyl-cutters/refurbished-machines/refurbished-creation-pcut-24-cutter-plotter-without-stand.html

You can change any design to one color yourself. Also Flexi starter 8.6 with contour cut, will contour cut for most vinyl cutters. http://cgi.ebay.com/FlexiStarter-Contour-Cutting-Vinyl-Cutter-flexi-starter_W0QQitemZ280491135150QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item414e9310ae

just kiddin' But very beautiful.

I went back thru Bills post and found his printer, http://www.cobraink.com/Printers/WF1100.htm

Absolutely Beautiful.!!! Did you make a backup up one for MY House also?

Signblazer is a cutting software that US Cutter includes with a cutter purchase, FREE software, They use it for an example for setups on their cutters. I was just stating disregard the Signblazer and Use the WinPC instead. It's hard to help people when they don't state what type of computer or operating system they are using. see if you can find your driver here http://support.uscutter.com/index.php?_m=downloads&_a=view

the same for your cutting software Instead of Signblazer use WinPC USB If you need to install your cutter through the USB port, you will need to install the USB drivers. USB drivers are available on our support site under Downloads, then MH/Refine Series Downloads. The USB driver is the very top selection, simply click on it and run it. It will self-install and when finished tell you that "FTDI drivers have been successfully installed." Once the drivers are installed, you can plug your USB cable in to the computer and Windows should tell you that "new hardware is found" and then "your hardware is installed and ready to use." You then need to check your device manager under the ports category to see which COM port the USB installed to (usually COM3 or COM4). Once you find out which port it installed to, you can then tell SignBlazer which port it is using and select the correct Device.

videos on the inkscape thread, at the top darker blue lettering, walk you right thru it.

Update: FROM THIER WEBSITE http://www.signuniverse.com SignUniverse.com should be ready to take orders in limited capacity starting Wednesday, April 14. SignUniverse orders will be fulfilled out of our Memphis location. If you are near the Northwest, please consider our sister site USCutter.com which is fulfilled out of the Seattle area. If you would like to place an order from the catalog or from a show special from ISA, Orlando, please call us at 1-800-661-0405.

You will love it. congrats.

You could try Beacon, they might deal. http://www.beacongraphics.com/equipment/ce-5000.html

great deal

maybe this will help http://support.uscutter.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=18

here is the FC8000 a 42" is $3795 + shipping. http://www.uscutter.com/Graphtec-FC8000-Series-Vinyl-Cutters_p_216.html and the FC8000 comes with the media catch basket, and that is a great help. the Q100 does not, that I can see anywhere.

No the Fc8000 does not print. It is just a newer model of the Fc7000..

I think they meant 48" it is 24" and 48" 5000 but the Q series has, from the Signwarehouse ad, NEW! Vinyl Express

removed by me

check out EBAY... craigslist.

:) NOW, Hey you two. I do really sleep, Up late and Up late in the morning LOL I make my own hours.

good luck with that!!!

I don't even have a US cutter product..

no,, those are for the Pcut and and laser, Graphtec is more solid than those Chinese cutters.

oh I remember, Your the one with the Graphtec-FC 7000mk-130 that comes one.. and goes off. the one you just bought, and your friend saw it running, but not you,, Did the tech support say what was wrong with it?

power supply about $40 or. mother board $80 .. have you tried to get parts yet? http://www.uscutter.com/PCut-Laserpoint-Parts-Supplies_c_9.html

I doubt that you will find anything. what's the matter with your Graphtec? Gosh, for a a few hundred more, you can buy a new Graphtec.