Leaderboard


Popular Content

Showing content with the highest reputation on 11/11/2018 in all areas

  1. 1 point
    Thanks in advance. I have a creation I'm going to cut. Consists of 3 colors (see pic). I know how to separate them to send to the cutter. I think my question is, do I cut the yellow, the red, and the black, then put them on top of each other? If not how do I cut them so they fit inside each other? Does that make sense? Sorry for the dumb question? As a newbie I am progressing quite nicely, thank you. Just get stuck on occasion. By the way, really digging this.
  2. 1 point
    Yeah, you got it figured out. Good job.
  3. 1 point
    Not bad for an amateur. Feel free to critique. I'll take all the help I can get, thanks.
  4. 1 point
    A big thank you from USCutter and VinylMaster to everyone who attended the USCutter Expo on November 9 and 10 in Memphis. We all enjoyed ourselves and everyone went away with a big smile!
  5. 1 point
    For general sign vinyl you would typically build it so that each layer is solid and install the yellow followed by the orange then topped by the black/brown top layer. You don't want any "inner" holes to try and match up with they will just give you trouble. Getting perfect registration on all the layers takes some practice and will be made a little harder with budget cutters due to their lack of pristine accuracy but this design looks like it will lend itself to a little inaccuracy without looking off. Some designs with HTV vinyl applied by heat press might be done in a different order but not this one.