cortney03 0 Posted September 12, 2008 my name is cortney.. just got my vinyl cutter... and I am lost! Share this post Link to post Share on other sites
Jay2703 704 Posted September 12, 2008 Welcome Cortney. If you are looking for help you might want to be a little more specific. If you're just looking to say hello, that's OK too. Share this post Link to post Share on other sites
cap580 0 Posted September 12, 2008 First of all, welcome to forum. If you have any questions or problems, post them here and you will get answers. Everybody here are a great bunch of people and more than willing to help us new to the business. Mark Share this post Link to post Share on other sites
SiboleGraphix 1 Posted September 12, 2008 Welcome Cortney! Amber Share this post Link to post Share on other sites
cortney03 0 Posted September 12, 2008 ok so here is my problems... i don't think that my cutter and computer are responding to each other. I have it hooked up through USB because they are quite a distance away from each other. When I typed what I wanted in SignBlazer and then went to cut.. it acts like it is going to cut then on the cutter it just says online. thats it! then the process goes away and I have nothing cut also, the cutter.. is it supposed to be all the way to the left its not mashing the red button or anything but was just wondering. any help would be appreciated! Share this post Link to post Share on other sites
charlie_b CFXPaintworks 1 Posted September 13, 2008 Hey Cort. Mine did that too...it would move all the way to the left then it would shut down. Basically, you have to assign the right port to your computer to make them work in harmony. Also, make sure your graphic is teh right size for your cutter..i was trying to cut a graphic that was 28 " long and muy cutter was only 24". I rotated the graphic and it was fine. ANyway, hope you get it working. Share this post Link to post Share on other sites
Guest kenya Posted September 14, 2008 Hi Cortney......Welcome. Hope Charlie's info worked. Let us know. Share this post Link to post Share on other sites
nonabelle 5 Posted September 14, 2008 WELCOME TO THE FORUM Share this post Link to post Share on other sites
captonzoom 2 Posted September 17, 2008 I had to disable and re-enable the cutter port in windows device manager each time i opened SBE. try that. Share this post Link to post Share on other sites
cortney03 0 Posted September 17, 2008 i think i have it working.. it printed a little something! thanks for the help.. im sure I will be askin more questions! Share this post Link to post Share on other sites
charlie_b CFXPaintworks 1 Posted September 17, 2008 Another thing to look at is in Sign cut or Sign Blazer, make sure you have the right vinyl size put in or else it will also do the "ALL THE WAY OVER TO ONE SIDE" thing. Share this post Link to post Share on other sites
lowone 3 Posted September 17, 2008 Welcome to the forum. We are here to help so ask away Share this post Link to post Share on other sites
Graphic Systems 1 Posted September 19, 2008 Welcome from IL ! Share this post Link to post Share on other sites
nonabelle 5 Posted September 22, 2008 welcome courtny Share this post Link to post Share on other sites
Buggie Pilot 4 Posted October 19, 2008 Welcome to the forums Your gonna like it here. Share this post Link to post Share on other sites
Rhino 0 Posted October 21, 2008 Welcome from MO. !You will learn alot from this forum don't be afraid to ask Questions Share this post Link to post Share on other sites
Benr98 40 Posted October 21, 2008 A little late...but welcome aboard! Share this post Link to post Share on other sites
sdgirl 13 Posted October 21, 2008 Welcome Courtney! Christi Share this post Link to post Share on other sites
haumana 1,221 Posted October 29, 2008 to the forum!! Share this post Link to post Share on other sites