I have a MH 721-MK2 Plotter and I need the drivers for Windows 10

[Isidro Bordas, S. A. 0]

Hello
I have a MH 721-MK2 Plotter and I need the drivers for Windows 10
where you can download it.

 

Thank you.

[haumana 1,220]

 

Hello
I have a MH 721-MK2 Plotter and I need the drivers for Windows 10
where you can download it.

 

Thank you.

There isn't a driver for the cutter per se, it's more about having the right cutting software that will support your cutter.  Unfortunately, US Cutter hasn't updated their support pages, but maybe this might help guide you in the right direction. 

https://support.uscutter.com/hc/en-us/sections/360007520231-MH-MK2-Series

What software do you have? How are you connecting your computer to the cutter?

[darcshadow 1,626]

You only need a driver if you're using the USB connection. That is nothing more than a cheap USB-2-serial chip in the cutter and often times doesn't work well. You're best best is to get a Tripp-Lite Keyspan USB-2-Serial adapter and a null modem cable. Connect the adapter to the USB on the computer and the null modem cable to the adapter and cutter.

The MH uses the HP-GL protocol, if you set your cutting software to use that you should be able to get it to work. If  you can't get something newer to work, the old SignBlazer Elements should work. You can also use Inkscape to cut with, it's not ideal, but it does work.