Junior 11 Posted September 6, 2020 THIS IS MY 1ST DRINKING GLASS SANDBLASTED 1 Share this post Link to post Share on other sites
darcshadow 1,626 Posted September 6, 2020 5 hours ago, Junior said: THIS IS MY 1ST DRINKING GLASS SANDBLASTED Looks good. One suggestion I'd make is to make the image just a bit smaller. About 1/4 of the circumference of the cup is the sweet spot for most designs. Share this post Link to post Share on other sites
Junior 11 Posted September 7, 2020 Thanks Darcshadow. It does not look like it is 1/4 below the rim but it is little over a 1/4 from the top of the rim. I took it with my camera phone. I am not good with pictures and especially with a smartphone. You dont give a smart phone to a dummy. I just learned how to text about 5 years ago thought i was doing some thing good. Every body thought i was crazy as texting is old news. 1 Share this post Link to post Share on other sites
darcshadow 1,626 Posted September 8, 2020 I don't mean up and down position, I mean how much the design wraps around the glass. When you look at a cup/glass, only about 1/4 of the cup is facing you. So if your design is bigger than about 1/4 of the cups circumference it will start to look distorted, or part of the image will not be seen without turning the cup. 1 Share this post Link to post Share on other sites
Junior 11 Posted September 12, 2020 Thanks Darcshadow i will make it a bit smaller to only do a 1/4 of the drinking glass. Thanks so very much. Thanks for all the help every body has offered to me and to all the newbies Share this post Link to post Share on other sites