Audrey 0 Posted February 10, 2020 I have a sc2 and have not used my cutter in about a week. After everything was ready to go I hit cut and it is not sending to the cutter. So i decided to do some research. I have check to see if it was active in the port. I have uninstalled and reinstalled the software. I deleted all passed cutting jobs. I have done an upgrade on my labtop. cleared all history on the internet. I am just so confused on what the heck happened. Can someone please help? TIA Share this post Link to post Share on other sites
slice&dice 2,450 Posted February 10, 2020 Download and install SignBlazerElements. Choose LiYu as the cutter type. Let us know what happens. http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 10, 2020 Change the USB cable. Or if you put a different one, that is longer, it may be the problem. 1 Share this post Link to post Share on other sites
haumana 1,220 Posted February 11, 2020 Would you happen to be on Windows 10? Nothing good comes from a Windows 10 update Share this post Link to post Share on other sites