Moody Blue 505 Posted October 28, 2015 Another truck graphic from Moody...go figure First time I have messed around with wrapping a cut graphic. Avery SW900 Matte Black....will never use any other material for vehicles after the ease of working with this. I have used it for solid wraps before but combined with R-Tape this was the easiest install I have done...even easier than my standard 4x4 decals with 751.Thicker material needs higher cut pressure but this would not have been possible to wrap around the bed using the 751 I would have normally cut this from...plus the air-release grid makes application a breeze and no need for a wet install. Applied both rear graphics, side sponsors (also cut from the Avery), trimmed, and post heated within an hour. I think there was more back and forth discussion on the design than actual production and application time. 10 Share this post Link to post Share on other sites
tooler82 182 Posted October 28, 2015 Perfect like always. 1 Share this post Link to post Share on other sites
Jburns 239 Posted October 28, 2015 Awesome. I really like the matte finish. Share this post Link to post Share on other sites
mr300s 1,272 Posted October 28, 2015 Awesome as always nice ride also Share this post Link to post Share on other sites
mb20music 760 Posted October 28, 2015 Nice work, sir Share this post Link to post Share on other sites
knucklehead 530 Posted October 28, 2015 Cool man! May have to try some of that Avery. Share this post Link to post Share on other sites
MadHatterGraphix 1,258 Posted October 28, 2015 Awesome. I really like the matte finish. I have to go with Jburns on this matte finish with the gloss just looks amazing. Share this post Link to post Share on other sites
Moody Blue 505 Posted October 28, 2015 Thanks everyone. Yeah the color is great! Not to mention being from SC garnet and black is one of my favorite color schemes 2 Share this post Link to post Share on other sites
louis clarke ii 202 Posted October 28, 2015 Thats tight like new rope. Share this post Link to post Share on other sites
Quitetitan4 90 Posted October 28, 2015 That looks BadA## Share this post Link to post Share on other sites
jmas 119 Posted October 29, 2015 What R-tape did you use? I've only used wrap vinyl for a few small things and I loved it so much that I've considered using it for a lot of vehicle stuff that I'd normally use 751 for. I made myself a small decal out of 3M carbon fiber wrap recently and could not get app tape to stick to it at all, but that's probably because it was carbon fiber and not regular wrap vinyl. Also, if you think white is hard to weed because you can't see the lines, try carbon fiber! Share this post Link to post Share on other sites
Moody Blue 505 Posted October 29, 2015 What R-tape did you use? I've only used wrap vinyl for a few small things and I loved it so much that I've considered using it for a lot of vehicle stuff that I'd normally use 751 for. I made myself a small decal out of 3M carbon fiber wrap recently and could not get app tape to stick to it at all, but that's probably because it was carbon fiber and not regular wrap vinyl. Also, if you think white is hard to weed because you can't see the lines, try carbon fiber! Just the regular R-Tape nothing fancy. I have used this on carbon fiber also and not had any issues...only the fun of weeding lol 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted October 29, 2015 what carbon fiber is that ? 3d 4d etc? what brand do u use.Im looking into doing a full hood wrap on my car. Share this post Link to post Share on other sites
Moody Blue 505 Posted October 29, 2015 That's the 3d carbon fiber from Metro Restyling Share this post Link to post Share on other sites
castironrobbie 30 Posted October 30, 2015 Nice job. Just checked the instagram. Your work is phenominal. Definitely an inspiration for me as a newb 1 Share this post Link to post Share on other sites
Moody Blue 505 Posted November 2, 2015 Nice job. Just checked the instagram. Your work is phenominal. Definitely an inspiration for me as a newb Thanks 1 Share this post Link to post Share on other sites
Quitetitan4 90 Posted November 2, 2015 All about them Gamecocks! Even though they suck this year! 1 Share this post Link to post Share on other sites
Moody Blue 505 Posted November 2, 2015 All about them Gamecocks! Even though they suck this year! uggg yeah I have pretty much given up on watching the games this season. However after Saturday we have a good chance of making a comeback and maybe at least send the Tigers home in tears. That's about the only thing we have going this year...now we need a new coach and a good recruiter and we will be back in action. With the right staff we could maybe see an SEC championship in the near future. 2 Share this post Link to post Share on other sites
knucklehead 530 Posted November 2, 2015 Maybe ya'll would like some GA coaches? Sounds like there's gonna be a few available pretty soon. Share this post Link to post Share on other sites
Moody Blue 505 Posted November 3, 2015 Maybe ya'll would like some GA coaches? Sounds like there's gonna be a few available pretty soon. If they win games...which they do...then yes. Share this post Link to post Share on other sites
DNA_Vinyl 262 Posted November 14, 2015 Nice. As always. Share this post Link to post Share on other sites
JLS Design 39 Posted November 27, 2015 Awesome stuff man! This is what I hope to get into here in my area. There are not many if any at all that do this sort of stuff. So starting out small with window decals and what not. I'm diggin' that carbon fiber look too! Just bought a roll myself. 1 Share this post Link to post Share on other sites
DNA_Vinyl 262 Posted November 30, 2015 I want....no NEED to do that to my truck. Nice work man. 1 Share this post Link to post Share on other sites
DC Custom 3 Posted December 4, 2015 Did you design that splash design yourself? (Might be a crazy question!) Share this post Link to post Share on other sites
Moody Blue 505 Posted December 7, 2015 Did you design that splash design yourself? (Might be a crazy question!) I did. Graphic Artist by trade so I do all my own artwork. Share this post Link to post Share on other sites